Stilescarrillo5727

The improvement of gel strength and absorption properties through the surface-crosslinking of superabsorbent polymers (SAPs) is essential for sanitary industry applications. We prepared core-SAP via aqueous solution copolymerization, and then surface-crosslinked the core-SAP under various conditions. The structure of the SAP was characterized using Fourier transform infrared (FT-IR) spectroscopy. Central composite design (CCD) of response surface methodology (RSM) has been applied to determine the optimum surface-crosslinking conditions such as surface-crosslinker content, reaction temperature, and reaction time. The optimal surface-crosslinking conditions were identified at a surface-crosslinker content of 2.22 mol%, reaction temperature of 160 °C, and reaction time of 8.7 min. The surface-crosslinked SAP showed excellent absorbency under load of 50 g/g with a permeability of 50 s. Other absorption properties were also evaluated by measuring the free absorbency and centrifuge retention capacity in saline solution.Various drug delivery systems were developed using a modified form of gum ghatti. Modifying gum ghatti using thioglycolic acid improves its mucoadhesive property, and hence, it is a suitable approach for the fabrication and development of controlled drug delivery systems. In accordance with regulatory guidelines, namely, the Organization for Economic Co-operation and Development's (OECD) 423 guidelines, an acute oral dose toxicity study was performed to examine the toxicological effects of gum ghattiin an animal (Wistar rat) after a single oral dose administration of pure gum ghatti and thiolated gum ghatti. Orally administered pure and thiolated gum ghatti do not reveal any considerable change in the behavioral pattern, food intake, body weight, hematology, or clinical symptoms of treated animals. Furthermore, histopathological studies showed no pathological mutations in the vital organs of Wistar rats after the oral administration of single doses of both types of gumghatti (i.e., 300 mg/kg and 2000 mg/kg body weight). Whole blood clotting studies showed the low absorbance value of the modified gum (thiolated gum ghatti) in contrast to the pure gum and control, hence demonstrating its excellent clotting capability. The aforementioned toxicological study suggested that the oral administration of a single dose of pure and thiolated gum ghatti did not produce any toxicological effects in Wistar rats. Consequently, it could be a suitable and safe candidate for formulating various drug delivery systems.As an alternative to conventional 3D printing methods that require supports, a new 3D printing strategy that utilizes guided light in situ has been developed for fabricating freestanding overhanging structures without supports. Light intensity has been found to be a crucial factor in modifying the dimensions of structures printed using this method; however, the underlying mechanism has not been clearly identified. Therefore, the light-intensity-dependent changes in the structure dimensions were analyzed in this study to elucidate the associated mechanism. Essentially, the entire process of deposition was monitored by assessing the behavior of photocurable droplets prior to their collision with the structure using imaging analysis tools such as a high-speed camera and MATLAB®. With increasing light intensity, the instability of the ejected falling droplets increased, and the droplet directionality deteriorated. This increased the dispersion of the droplet midpoints, which caused the average midpoints of the deposited single layers to shift further away from the center of the structure. Consequently, the diameter of the structure formed by successive stacking of single layers increased, and the layer thickness per droplet decreased. These led to light-intensity-dependent differences in the diameter and height of structures that were created from the same number of droplets.For the seafood industry, Vibrio parahaemolyticus, one of the most prevalent food-borne pathogenic bacteria that forms biofilms, is a constant cause of concern. There are numerous techniques used throughout the food supply chain to manage biofilms, but none are entirely effective. Through assessing its antioxidant and antibacterial properties, quercetin will be evaluated for its ability to prevent the growth of V. parahaemolyticus biofilm on shrimp and crab shell surfaces. With a minimum inhibitory concentration (MIC) of 220 µg/mL, the tested quercetin exhibited the lowest bactericidal action without visible growth of bacteria. In contrast, during various experiments in this work, the inhibitory efficacy of quercetin without (control) and with sub-MICs levels (1/2, 1/4, and 1/8 MIC) against V. parahaemolyticus was examined. CDDO-Im mw With increasing quercetin concentration, swarming and swimming motility, biofilm formation, and expression levels of related genes linked to flagella motility (flaA and flgL), biofilm formation (vp0952 and vp0962), and quorum-sensing (luxS and aphA) were all dramatically reduced (p < 0.05). Quercetin (0-110 μg/mL) was investigated on shrimp and crab shell surfaces, the inhibitory effects were 0.68-3.70 and 0.74-3.09 log CFU/cm2, respectively (p < 0.05). The findings were verified using field emission scanning electron microscopy (FE-SEM), which revealed quercetin prevented the development of biofilms by severing cell-to-cell contacts and induced cell lysis, which resulted in the loss of normal cell shape. Furthermore, there was a substantial difference in motility between the treatment and control groups (swimming and swarming). According to our findings, plant-derived quercetin should be used as an antimicrobial agent in the food industry to inhibit the establishment of V. parahaemolyticus biofilms. These findings suggest that bacterial targets are of interest for biofilm reduction with alternative natural food agents in the seafood sector along the entire food production chain.For thermal protection materials (TPMs) which are used to protect space vehicles from extreme thermomechanical environments, the thermal conductivity of the original material and the char layer that has formed during ablation plays a significant role in determining the ablation performance. In order to investigate this, in this study, we introduced glass hollow microspheres (GHMs), phenolic hollow microspheres (PHMs), and acrylonitrile-methyl methacrylate copolymer hollow microspheres (AMHMs) into silicone rubber (SR), and the ablation performance of these composites was systematically studied. The thermogravimetric results showed that the residue yield of the SR composites was increased with the incorporation of the hollow microspheres. Compared to the SR composites without the hollow microspheres, the residue weight values under 800 °C (R800) of the SR composites with the 30 parts of fumed silica per hundred of the SR (phr) addition of GHMs, PHMs, and AMHMs were increased from 10.11% to 21.70%, 18.31%, and 20.83%, respectively. The ablation tests showed that the addition of the AMHMs enhanced the ablation performance of the SR composites because the linear ablation rates and the backplane temperature were clearly decreased when compared to the SR composites without the hollow microspheres. This work provides an effective and potential method for preparing thermal protection materials with an improved ablation performance.The purpose of this study is to investigate the stress concentration of a corroded steel plate strengthened with carbon fiber reinforced polymer (CFRP) plates. An accelerated corrosion experiment was first executed to acquire corroded steel plates, and then surface profile measurements were conducted to obtain 3D coordinate data of the corroded steel surface. Finite element models considering the surface morphology of the corroded steel plate and the interfacial bonding properties between the CFRP plate and the corroded steel plate were established to investigate the stress concentration of the corroded steel plate strengthened with and without CFRP plates. The reliability of the numerical modeling method was verified based on a mesh convergence analysis and a comparison of the fatigue test, 3D morphology scanning, and numerical analysis results. Specimens with five levels of corrosion damage, six kinds of CFRP-strengthening stiffness, five kinds of adhesive thickness, and five levels of CFRP prestress were nfness and prestress level of the CFRP plates, and it presented a very small increasing trend with the increase of the adhesive thickness.A novel, previously unreported, method for synthesising hyperbranched (HB) materials is detailed. Their use as additives to produce lubricant formulations that exhibit enhanced levels of wear protection and improved low-temperature oil viscosity and flow is also reported. The lubricant formulations containing HB additives were found to exhibit both significantly lower viscosities and improved in-use film-forming properties than the current industry standard formulations. To achieve this, alkyl methacrylate oligomers (predominantly dimers and trimers) were synthesised using catalytic chain transfer polymerisation. These were then used as functional chain transfer agents (CTA) to control the polymerisation of divinyl benzene (DVB) monomers to generate highly soluble, high polydispersity HB polymers. The level of dimer/trimer purification applied was varied to define its influence on both these HB resultant structures and the resultant HB additives' performance as a lubricant additive. It was shown that, while the DVB acted as the backbone of the HB, the base oil solubility of the additive was imparted by the presence of the alkyl chains included in the structure via the use of the oligomeric CTAs.Chitosan (CTS)/corn starch (CSH)/nano-TiO2/graphene (Gr) antibacterial active packaging films were prepared by ultrasonic-assisted electrospray deposition and solution-casting methods, and the effects of the TiO2Gr mass ratio and ultrasonication power on their morphology and mechanical, optical, thermal, barrier, and antibacterial properties were investigated. The film fabricated at a TiO2Gr ratio of 64 and an ultrasonication power of 160 W exhibited a uniform distribution of the nanofillers in the CTS/CSH matrix and significantly enhanced the mechanical, barrier, and water-resistance properties. Furthermore, this film demonstrated superior ultraviolet and visible light-shielding characteristics as compared with those of the non-filled CTS/CSH film, while its Escherichia coli and Staphylococcus aureus inhibition efficiencies were equal to 96.67 ± 0.09% and 99.85 ± 0.13%, respectively. Therefore, the film can effectively prevent food spoilage, indicating its potential for food-packaging applications.Rheological parameters of cellulose nanofibril dispersions (CNF) are relevant and commonly used as quality control for producing of this type of material. These parameters are affected by morphological features and size distribution of the nanofibrils. Understanding the effect of size distribution is essential for analyzing the rheological properties, viscosity control, performance of CNFs, and potential dispersion applications. This study aims at comprehending how the morphological characteristics of the CNFs and their size distribution affect the rheological behavior of dispersions. The CNF dispersions were fractionated by size, obtaining six fractions of each, which were analyzed for their morphology and rheology (viscosity, intrinsic viscosity). In the dilute region, the viscosity and intrinsic viscosity behavior of CNF dispersions are linear concerning the size distribution present in the dispersion. In the semi-dilute region, the size of the fibrils and the fiber aggregates have a relevant effect on the viscosity behavior of CNF dispersions, which are satisfactorily related (R2 = 0.