Somervillenichols8717

Carbon-based nanomaterials have a high thermal conductivity, which can be exploited to prepare nanofluids. Graphene is a hydrophobic substance, and consequently, graphene-based nanofluid stability is improved by adding surfactants. An attractive alternative is the decoration of reduced graphene oxide (rGO) with metallic materials to improve the thermal conductivity without affecting the stability of nanofluids. This study focuses on the synthesis and characterization of rGO/Ag (0.1 wt.%) aqueous nanofluids. Moreover, the effects of the Ag concentration (0.01-1 M) on the thermal conductivity and viscosity during the synthesis of rGO/Ag composite are analyzed. The nanofluid thermal conductivity showed increases in relation to the base fluid, the most promising being 28.43 and 26.25% for 0.1 and 1 M of Ag, respectively. Furthermore, the nanofluids were Newtonian in the analyzed range of shear rates and presented a moderate increase (<11%) in viscosity. Aqueous nanofluids based on rGO/Ag nanocomposites are a potential alternative for applications as heat transfer fluids.Cellulose derivatives have found significant applications in composite materials, mainly because of the increased mechanical performance they ensure. When added to cement-based materials, either in the form of nanocrystals, nanofibrils or micro/nanofibers, cellulose acts on the mixture with fresh and hardened properties, affecting rheology, shrinkage, hydration, and the resulting mechanical properties, microstructure, and durability. Commercial cotton wool was selected as starting material to produce multifunctional nanocelluloses to test as additives for mortars. Cotton wool was oxidized to oxidized nanocellulose (ONC), a charged nanocellulose capable of electrostatic interaction, merging cellulose and nanoparticles properties. Oxidized nanocellulose (ONC) was further functionalized by a radical-based mechanism with glycidyl methacrylate (GMA) and with a mixture of GMA and the crosslinking agent ethylene glycol dimethacrylate (EGDMA) affording ONC-GMA and ONC-GMA-EGDMA, both multifunctional-charged nanocellulose merging cellulose and bound acrylates properties. In this work, only ONC was found to be properly suitable for suspension and addition to a commercial mortar to assess the variation in mechanical properties and water-mortar interactions as a consequence of the modified microstructure obtained. The addition of oxidized nanocellulose caused an alteration of mortar porosity, with a decreased percentage of porosity and pore size distribution shifted towards smaller pores, with a consequent increase in compressive resistance, decrease in water absorption coefficient, and increased percentage of micropores present in the material, indicating a potential improvement in mortar durability.Interleukin-6 (IL-6) is generally used as a biomarker for the evaluation of inflammatory infection in humans and animals. However, there is no approach for the on-site and rapid detection of IL-6 for the monitoring of mastitis in dairy farm scenarios. A rapid and highly sensitive surface enhanced Raman scattering (SERS) immunofiltration assay (IFA) for IL-6 detection was developed in the present study. In this assay, a high sensitivity gold core silver shell SERS nanotag with Raman molecule 4-mercaptobenzoic acid (4-MBA) embedded into the gap was fabricated for labelling. Through the immuno-specific combination of the antigen and antibody, antibody conjugated SERS nanotags were captured on the test zone, which facilitated the SERS measurement. The quantitation of IL-6 was performed by the readout Raman signal in the test region. The results showed that the detection limit (LOD) of IL-6 in milk was 0.35 pg mL-1, which was far below the threshold value of 254.32 pg mL-1. The recovery of the spiking experiment was 87.0-102.7%, with coefficients of variation below 9.0% demonstrating high assay accuracy and precision. selleck chemical We believe the immunosensor developed in the current study could be a promising tool for the rapid assessment of mastitis by detecting milk IL-6 in dairy cows. Moreover, this versatile immunosensor could also be applied for the detection of a wide range of analytes in dairy cow healthy monitoring.With the increasing influence of electromagnetic radiation on precision instruments and organisms, there is an urgent need for research on lightweight and high-strength electromagnetic wave absorbing materials. This study has probed into a new composite absorbing material based on reduced graphene oxide (rGO)-NiMnO3, where the like-core-shell NiMnO3 is anchored on the rGO nanosheets to significantly improve the electromagnetic wave dissipation ability of the composite material using the inter-component dipole polarization and interface polarization. At the same time, NiMnO3 can effectively adjust the impedance matching ratio of rGO so that electromagnetic waves can effectively enter the absorbing material. At a thickness of 3.73 mm, the maximum absorption strength of rGO-NiMnO3 reaches -61.4 dB at 6.6 GHz; at a thickness of 2.5 mm, the adequate absorption bandwidth is 10.04-18.00 GHz, achieving a full coverage for the Ku band. As a new option for preparing lightweight and broadband electromagnetic wave absorbing materials, rGO-NiMnO3 is an ideal material for electromagnetic wave protection.InSb nanoflags are grown by chemical beam epitaxy in regular arrays on top of Au-catalyzed InP nanowires synthesized on patterned SiO2/InP(111)B substrates. Two-dimensional geometry of the nanoflags is achieved by stopping the substrate rotation in the step of the InSb growth. Evolution of the nanoflag length, thickness and width with the growth time is studied for different pitches (distances in one of the two directions of the substrate plane). A model is presented which explains the observed non-linear time dependence of the nanoflag length, saturation of their thickness and gradual increase in the width by the shadowing effect for re-emitted Sb flux. These results might be useful for morphological control of InSb and other III-V nanoflags grown in regular arrays.A colorimetric liquid sensor based on a poly(vinyl alcohol)/silver nanoparticle (PVA/AgNPs) hybrid nanomaterial was developed for gamma radiation in the range of 0-100 Gy. In this study, gamma rays (Cobalt-60 source) triggered the aggregation of AgNPs in a PVA/silver nitrate (AgNO3) hybrid solution. The color of this solution visibly changed from colorless to dark yellow. Absorption spectra of the PVA/AgNPs solution were analyzed by UV-Vis spectrophotometry in the range of 350-800 nm. Important parameters, such as pH and AgNO3 concentration were optimized. The accuracy, sensitivity, stability, and uncertainty of the sensor were investigated and compared to the reference standard dosimeter. Based on the spectrophotometric results, an excellent positive linear correlation (r = 0.998) between the absorption intensity and received dose was found. For the accuracy, the intra-class correlation coefficient (ICC) between the PVA/AgNPs sensor and the standard Fricke dosimeter was 0.998 (95%CI). The sensitivity of this sensor was 2.06 times higher than the standard dosimeter. The limit of detection of the liquid dosimeter was 13.4 Gy. Moreover, the overall uncertainty of this sensor was estimated at 4.962%, in the acceptable range for routine standard dosimeters (<6%). Based on its dosimetric performance, this new PVA/AgNPs sensor has potential for application as an alternative gamma sensor for routine dose monitoring in the range of 13.4-100 Gy.The effect of an orthogonal magnetic field is introduced into a numerical simulator, based on the solution of the Dirac equation in the reciprocal space, for the study of transport in graphene devices consisting of armchair ribbons with a generic potential. Different approaches are proposed to reach this aim. Their efficiency and range of applicability are compared, with particular focus on the requirements in terms of model setup and on the possible numerical issues that may arise. Then, the extended code is successfully validated, simulating several interesting magnetic-related phenomena in graphene devices, including magnetic-field-induced energy-gap modulation, coherent electron focusing, and Aharonov-Bohm interference effects.The mid-infrared (MIR, 2-20 μm) waveband is of great interest for integrated photonics in many applications such as on-chip spectroscopic chemical sensing, and optical communication. Thermo-optic switches are essential to large-scale integrated photonic circuits at MIR wavebands. However, current technologies require a thick cladding layer, high driving voltages or may introduce high losses in MIR wavelengths, limiting the performance. This paper has demonstrated thermo-optic (TO) switches operating at 2 μm by integrating graphene onto silicon-on-insulator (SOI) structures. The remarkable thermal and optical properties of graphene make it an excellent heater material platform. The lower loss of graphene at MIR wavelength can reduce the required cladding thickness for the thermo-optics phase shifter from micrometers to tens of nanometers, resulting in a lower driving voltage and power consumption. The modulation efficiency of the microring resonator (MRR) switch was 0.11 nm/mW. The power consumption for 8-dB extinction ratio was 5.18 mW (0.8 V modulation voltage), and the rise/fall time was 3.72/3.96 μs. Furthermore, we demonstrated a 2 × 2 Mach-Zehnder interferometer (MZI) TO switch with a high extinction ratio of more than 27 dB and a switching rise/fall time of 4.92/4.97 μs. A comprehensive analysis of the device performance affected by the device structure and the graphene Fermi level was also performed. The theoretical figure of merit (2.644 mW-1μs-1) of graphene heaters is three orders of magnitude higher than that of metal heaters. Such results indicate graphene is an exceptional nanomaterial for future MIR optical interconnects.Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry, and bioelectronics. Sol-gel technology allows us to obtain a wide range of high-purity materials from nanopowders to thin-film coatings with high efficiency and low cost, which makes it one of the preferred techniques for creating organic-inorganic matrices for biocomponent immobilization. This review focuses on the synthesis and application of hybrid sol-gel materials obtained by encapsulation of microorganism cells in an inorganic matrix based on silicon, aluminum, and transition metals. The type of immobilized cells, precursors used, types of nanomaterials obtained, and their practical applications were analyzed in detail. In addition, techniques for increasing the microorganism effective time of functioning and the possibility of using sol-gel hybrid materials in catalysis are discussed.We have fabricated poly(ε-caprolactone) (PCL) films with flat and honeycomb-patterned (HCP) structures to coat polyaniline (PANI) on the film surface. In addition, the effect of chemical modification of PANI by sulfuric acid (H2SO4) was also studied for antibacterial activity. The flat and HCP PCL films were obtained by simple evaporation of the solvent and via the breath figure (BF) method, respectively. The morphology and chemical composition of PANI coated on the film surface were evaluated by scanning electron microscopy (SEM) and X-ray spectroscopy (EDX). Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analyses (TGA) were obtained to identify the PANI coating. The wettability and conductivity of the films were also measured. Applicational aspects were evaluated by assessing antibacterial and antibiofilm activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The EDX, TGA, and FT-IR findings indicated chemical modification of PCL film by PANI and H2SO4. The conductivity of the films was increased by the coating of PANI to the patterned surface and additionally increased by the chemically modified PANI.