Snyderlloyd9919

Thin films of transition-metal dichalcogenides are potential materials for optoelectronic applications. However, the application of these materials in practice requires knowledge of their fundamental optical properties. Many existing methods determine optical constants using predefined models. Here, a different approach was used. We determine the sheet conductance and absorption coefficient of few-layer PtSe2 in the infrared and UV-vis ranges without recourse to any particular model for the optical constants. PtSe2 samples with a thickness of about 3-4 layers were prepared by selenization of 0.5 nm thick platinum films on sapphire substrates at different temperatures. Differential reflectance was extracted from transmittance and reflectance measurements from the front and back of the sample. The film thickness, limited to a few atomic layers, allowed a thin-film approximation to calculate the optical conductance and absorption coefficient. The former has a very different energy dependence in the infrared, near-infrared, and visible ranges. The absorption coefficient exhibits a strong power-law dependence on energy with an exponent larger than three in the mid-infrared and near-infrared regions. We have not observed any evidence for a band gap in PtSe2 thin layers down to an energy of 0.4 eV from our optical measurements.Mechanochemistry is very attractive as an efficient, solvent-free, and simplified technique for the preparation of composite adsorbents. Here, a series of polyethyleneimine (PEI)-modified SiO2 adsorbents were prepared via mechanical ball milling for selective adsorption of CO2 at high temperatures. The structural properties of these adsorbents were characterized by XRD, SEM, TGA, FTIR, and N2 adsorption-desorption. This method can better disperse the PEI evenly in the SiO2 as well as maintain the porous structure of the adsorbents by comparing with the impregnated adsorbents. These adsorbents presented appreciable performance in separating CO2 at high temperatures, and the CO2 adsorption capacity of PEI(70%)/SiO2 is up to 2.47 mmol/g at 70 °C and 1.5 bar, which is significantly higher than that of the same type of CO2 adsorbent reported in the literature. Furthermore, the adsorbent of PEI(70%)/SiO2 provided an ideally infinite selectivity for CO2/N2 (1585) at 70 °C. These results showed that mechanical grinding methods are a simple and effective approach to producing amine-modified silica composite adsorbents.Spinal muscular atrophy (SMA) is an autosomal recessive neurodegenerative disorder characterized by loss of motor neurons (MN) in the spinal cord leading to progressive muscle atrophy and weakness. SMA is caused by mutations in the survival motor neuron 1 (SMN1) gene, resulting in reduced levels of survival motor neuron (SMN) protein. The mechanisms that link SMN deficiency to selective motor neuron dysfunction in SMA remain largely unknown. We present here, for the first time, a comprehensive quantitative TMT-10plex proteomics analysis that covers the development of induced pluripotent stem cell-derived MNs from both healthy individuals and SMA patients. We show that the proteomes of SMA samples segregate from controls already at early stages of neuronal differentiation. The altered proteomic signature in SMA MNs is associated with mRNA splicing, ribonucleoprotein biogenesis, organelle organization, cellular biogenesis, and metabolic processes. PLX-4720 We highlight several known SMN-binding partners and evaluate their expression changes during MN differentiation. In addition, we compared our study to human and mouse in vivo proteomic studies revealing distinct and similar signatures. Altogether, our work provides a comprehensive resource of molecular events during early stages of MN differentiation, containing potentially therapeutically interesting protein expression profiles for SMA.Recently, molecular dynamics (MD) simulations have been utilized to investigate the barrier properties of human skin stratum corneum (SC) lipid bilayers. Different MD methods and force fields have been utilized, with predicted permeabilities varying by few orders of magnitude. In this work, we compare constrained MD simulations with restrained MD simulations to obtain the potential of the mean force and the diffusion coefficient profile for the case of a water molecule permeating across an SC lipid bilayer. Corresponding permeabilities of the simulated lipid bilayer are calculated via the inhomogeneous solubility diffusion model. Results show that both methods perform similarly, but restrained MD simulations have proven to be the more robust approach for predicting the potential of the mean force profile. Critical to both methods are the sampling of the whole trans-bilayer axis and the following symmetrization process. Re-analysis of the previously reported free energy profiles showed that some of the discrepancies in the reported permeability values is due to misquotation of units, while some are due to the inaccurately obtained potential of the mean force. By using the existing microscopic geometrical models via the intercellular lipid pathway, the permeation through the whole SC is predicted from the MD simulation results, and the predicted barrier properties have been compared to experimental data from the literature with good agreement.The controllability study is an integral part of chemical process design. In this work, the controllability of two special distillation techniques, extractive distillation and pressure swing distillation, designed for the separation of azeotropic mixtures is investigated with dynamic tools. The control design interface of Aspen Plus and Matlab are applied for the modeling and evaluation of the two systems. Dynamic controllability indices are determined and aggregated in a desirability function. The results are compared to obtain efficient help for process design activity. The pressure swing distillation shows significantly better controllability features than the extractive distillation. The reason can be the fact that in the case of the extractive distillation, a third compound, the extractive agent, is added to the system to carry out the separation, therefore making the system more complex. As far as the selection of manipulated variables is concerned, in the case of the extractive distillation, the reflux flows should be preferred to the reflux ratios but in the case of the pressure swing distillation, the reboiler heat loads are preferred to the reflux ratios since those are closer to the controlled compositions. Both separation systems show worse controllability features if the product purity requirement is approaching to the pure products, that is, close to 100%. Although the energy consumption of the pressure swing distillation is higher than that of the extractive distillation, it has the inherent feature that it can be automatically heat integrated due to a column operated at high pressure and, as a consequence, higher temperatures.Coal seam pores are the major places for coalbed methane storage, diffusion, and seepage, and changes in the pore structure cause changes in the porosity. The porosity of coal seams can be effectively improved by applying strongly corrosive and oxidative chemical reagents to coal seam pores, but these reagents may pose threats to coal workers, corrode mining equipment, and pollute the environment. In this study, coal samples were treated with solutions compounded by acetic acid and anionic, cationic, and non-ionic surfactants. The variations of pores in coal samples after the compound modification of surfactants and acetic acid were investigated. Experimental methods of SEM, MIP, LTNA, PAC, and FTIR and fractal theory are applied in this work. The results reveal that the compound modification of surfactants and acetic acid conduces to the transformation of pore shape and affects a wider pore size range. The anionic and cationic surfactants can increase the hydrophilicity and can promote the connection of larger pores. The non-ionic surfactant reduces the hydrophilicity and capillary effect yet increases the porosity. Thus, it promotes the connection of pores and makes the pore surface smooth and the pore structure simple. Comparing the three kinds of surfactants, non-ionic surfactants are more conducive to coal seam pore reconstruction.Lactic acid bacteria produce various bioactive compounds widely used in human healthcare. However, studies on cryoprotective agents for the efficient storage of lactic acid bacteria after freeze-drying are still lacking. Here, we report the shelf-life extension effects of a highly efficient and eco-friendly cryoprotective agent and a cold adaptation method on Lactobacillus sakei WiKim31. Cold adaptation of L. sakei WiKim31 increased exopolysaccharide expression in response to abiotic stress. As a possible cryoprotective agent, the citrus byproduct (CP) contains a variety of sugars, amino acids, and cations, exhibiting high antioxidant activity. L. sakei WiKim31 powders formulated with CP or a mixture of soy powder (SP) and CP exhibited high cell viability at 58.3 and 76.3%, respectively, after 56 days of storage. These results indicate that CP can be efficiently used as a novel cryoprotective agent either alone or in combination with SP to improve the storage conditions of L. sakei WiKim31 and preserve it longer.Long-term nondestructive monitoring of cells is of significant importance for understanding cell proliferation, cell signaling, cell death, and other processes. However, traditional monitoring methods are limited to a certain range of testing conditions and may reduce cell viability. Here, we present a microgap, multishot electroporation (M2E) system for monitoring cell recovery for up to ∼2 h using ∼5 V pulses and with excellent cell viability using a medium cell population. Electric field simulations reveal the bias-voltage- and gap-size-dependent electric field intensities in the M2E system. In addition to excellent transparency with low cell toxicity, the M2E system does not require specialized components, expensive materials, complicated fabrication processes, or cell manipulations; it just consists of a micrometer-sized pattern and a low-voltage square-wave generator. Ultimately, the M2E system can offer a long-term and nontoxic method of cell monitoring.Polymer electrolyte membranes in which the hydrophilic and hydrophobic domains phase separate exhibit improved properties and stability. Such a phase separation of hydrophilic and hydrophobic domains can be achieved by polymerizing a 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide-bisphenol A (DOPO-BPA) and 1,4-bis(4-fluorobenzoyl)benzene (1,4-FBB) monomer. In this work, sulfonated polymer membranes with various degrees of sulfonation (DS) were prepared and their physicochemical and electrochemical properties were studied. In addition, the effect of molecular structure on the durability of the copolymers was investigated. The sulfonated copolymers were characterized by Fourier-transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Then, sulfonated membranes were prepared using these copolymers by the solvent casting method, and their morphologies were investigated by atomic force microscopy. The effect of DS on the thermal, mechanical, and oxidative stabilities, water uptake behavior, and ion-exchange capacity of the membranes was determined.