Sauervincent1185

Tips For Replacing a Window Handle

Changing your window handle is an easy project that can be completed in the convenience of your own home. Follow these steps to ensure a smooth and beautiful finish.

Begin by removing the screw covers to expose the screws within the uPVC window handle. Then measure the spindle length to ensure that you receive the right size replacement.

1. Determine the Spindle Length

It is essential to get the spindle size right when replacing windows handles. It could affect the tightness or elasticity of the handle and whether the handle will lock correctly into the frame of the window. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle could be an industry standard cross-section of 8mm or older 9mm versions. The modern industry standard is 8mm however this was not always the case, so when buying a new handle it's essential to check the dimensions.

Take the handle off. This can be done easily by turning the handle to the open position and taking off two screws that secure the handle (which are often hidden behind plastic caps which must be removed). Once the handle has been removed, measure the distance from the base to the end. This will give you the measurement needed to buy a replacement.

There are a lot of options to consider when choosing a new window handle from sleek chrome that can fit into a contemporary home to traditional brass that looks stunning in restored Georgian rooms or even the more traditional Tudor cottages with curled monkey tail locks! There are many options to choose from, but the most important is to pick a style that matches your home.

Espag handles are typically installed to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles can vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Cadenza window handles are a different size as they have an angled blade that operates a multi-point locking mechanism inside the window.

Another consideration when selecting the best window handle is knowing which hand you require, this is simply defined by what hand you use to open the door. Inline Espag window handles aren't hand-operated and can be used on right or left handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.

2. Remove the Handle

A window handle that has fallen out can be a hassle, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can replace a uPVC handle yourself. You will require only a few basic hand tools as well as some time to complete the task.

You must first open the window, and ensure that it is not locked. Next, you need to remove the screws that are holding the handle in place. Once these are removed, you can start working on the removal of the handle itself.

The handle is connected to a spindle in the window frame. Depending on the kind, this is held in place with a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both types of handles can be found on casement windows, including aluminium ones. They can be locked with a key to prevent unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.





To remove the handle, you will require a flat-bladed screwdriver. When this clip is released the handle will slide off the spindle. Once the old handle has been removed, you'll need measure the spindle length and make sure that the new handle will fit.

Once you have the right size, you can now put the new handle in place. You will need to ensure that the new handle is firmly fixed and is turning the correct way (clockwise for open and counterclockwise for closed). It is also crucial to make sure that it is not fitted upside down.

Finally, you should replace the screw cap caps. After you've done this, you can test the handle to make sure that it works properly. Also, you should test the locking mechanism by moving the handle to the locked position, and then back again.

3. Take off the Screws

A uPVC handle is an important component of any house and is the first thing to show signs of wear or damage. This could be due to natural factors or through frequent use, and sometimes intentional damage caused by criminals who might seek to open a closed window to gain access to your home. However, a simple replacement will solve the issue and stop the issue from happening again.

UPVC handles may also be difficult to open when the locking mechanism isn't working correctly. Often, the problem can be resolved by replacing the multipoint lock rather than the entire handle, and it's worthwhile to check this out because it could save you money.

Once you've removed your old handle, you'll have to remove the screws fixing it to the base. These screws are usually found on the inside of the handle base. It is possible to use a screwdriver do this. Be cautious not to over tighten the handle as this could cause it to loosen.

You'll then have to locate the fixing screws or pins that hold the new handle in place. These are usually located on the inside of the handle base. You will need an instrument to remove them. After they've been removed, you'll be required to replace the caps on screws in the event that you want to do so and test the new handle to ensure it's working correctly.

Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. Make sure the handle is in an open position and that the screws are securely secured prior to replacing the screws' covers if you wished to do this. Once this is complete you're all done and you can enjoy your new window handle. This should allow you to avoid expensive window and door replacements in the future. If you'd like more assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.

4. Install the new handle

The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in a few easy steps. Identifying the type of window handle, measuring the length of its spindle and knowing what tools you'll require to complete the task are key. Always ensure safety when working with windows and tools. Be sure to follow the steps and ensure that you have an appropriate handle to use.

The first step is to find the screws that hold your existing window handle and remove these, whilst keeping an appropriate grip on the handle itself to prevent it from falling and injuring yourself. Once the screws have been removed, you can place them in a safe place to be replaced later.

After the handle that was used previously was removed, you are now able to begin to fit your new one. It is important that the handle fits perfectly so that it functions correctly and locks the window in position. Next, slide the square metal bar on the handle into the window mechanism hole.

The final step is to replace the screws caps and test the handle to make sure it is working. If you're not satisfied with the results or if your window doesn't open and close as it should the next step is to contact our experts who will be able to assist you.

The majority of homes in the UK have uPVC windows, and as such, many of them will require to be replaced because of wear or damage. Anyone with a bit of DIY experience can easily carry out the process. It is essential that the handle you use is in line with the style and size of your window. Contact us if you are unsure of the type of handle you need. They'll be able to guide you through the choices.