Peterssonmcconnell8731

At the same time, the separation performance of H2/CH4 gas pair surpasses the 2008 upper bound and that of CO2/CH4 gas pair nearly approaches the 2008 upper bound. The cross-linking strategy used herein provides a feasible and effective route for improving membrane stability and membrane performance in the MMM system for gas separation.A photoelectrochemical (PEC) biosensor is a very efficient and sensitive detection technology for the quick and effective conversion of light to electrical signals. However, the sensitivity and stability of the sensors are still unsatisfactory based on single-phase semiconductors or in the absence of sacrificial agents in the test solution. Herein, we present an efficient curing sacrificial agent-induced dual-heterojunction PEC system, which can detect the prostate-specific antigen (PSA) with high sensitivity. This PEC immune system was initially fabricated using single-walled carbon nanohorns (SWCNHs), p-type MoS2, and n-type Ag2S successively through a Schottky junction and p-n heterojunction on a glassy carbon electrode with electrodeposited gold nanoparticles. Then, the capture antibody (Ab1) was modified and the nonspecific binding sites were sealed off. Meanwhile, the ferrocene (Fc) solidified with hollow nanospheres of zinc ferrite (ZnFe2O4) served as a curing electronic sacrificial agent (Fc-ZnFe2O4). Next, the detection antibody labeled with Fc-ZnFe2O4 (Ab2-Fc-ZnFe2O4) was used as a bio-nanoprobe and captured by PSA and Ab1 via sandwich immunorecognition. Under white light, PEC signal amplification could be driven by the curing electronic sacrificial agent-induced dual-heterojunction to achieve the highly sensitive detection of the target. This proposed system exhibited excellent photocurrent performance within the working range from 1 fg·mL-1 to 100 ng·mL-1 at a low detection limit of 0.44 fg·mL-1 (S/N = 3). The proposed strategy features high sensitivity, selectivity, and stability that provides a new opportunity for the development of biosensors in the PEC field.The elaboration of scaffolds able to efficiently promote cell differentiation toward a given cell type remains challenging. Here, we engineered dense type I collagen threads with the aim of providing scaffolds with specific morphological and mechanical properties for C3H10T1/2 mesenchymal stem cells. Extrusion of pure collagen solutions at different concentrations (15, 30, and 60 mg/mL) in a PBS 5× buffer generated dense fibrillated collagen threads. For the two highest concentrations, threads displayed a core-shell structure with a marked fibril orientation of the outer layer along the longitudinal axis of the threads. Young's modulus and ultimate tensile stress as high as 1 and 0.3 MPa, respectively, were obtained for the most concentrated collagen threads without addition of any cross-linkers. C3H10T1/2 cells oriented themselves with a mean angle of 15-24° with respect to the longitudinal axis of the threads. Cells penetrated the 30 mg/mL scaffolds but remained on the surface of the 60 mg/mL ones. After three weeks of culture, cells displayed strong expression of the tendon differentiation marker Tnmd, especially for the 30 mg/mL threads. These results suggest that both the morphological and mechanical characteristics of collagen threads are key factors in promoting C3H10T1/2 differentiation into tenocytes, offering promising levers to optimize tissue engineering scaffolds for tendon regeneration.The ubiquitin proteasome system (UPS) is an emerging drug target in malaria due to its essential role in the parasite's life cycle stages as well its contribution to resistance to artemisinins. TVB-2640 inhibitor Polymorphisms in the Kelch13 gene of Plasmodium falciparum are primary markers of artemisinin resistance and among other things are phenotypically characterized by an overactive UPS. Inhibitors targeting the proteasome, critical components of the UPS, display activity in malaria parasites and synergize artemisinin action. Here we report the activity of small molecule inhibitors targeting mammalian deubiquitinating enzymes, DUBs (upstream UPS components), in malaria parasites. We show that generic DUB inhibitors can block intraerythrocytic development of malaria parasites in vitro and possess antiparasitic activity in vivo and can be used in combination with additive to synergistic effect. We also show that inhibition of these upstream components of the UPS can potentiate the activity of artemisinin in vitro as well as in vivo to the extent that artemisinin resistance can be overcome. Combinations of DUB inhibitors anticipated to target different DUB activities and downstream proteasome inhibitors are even more effective at improving the potency of artemisinins than either inhibitors alone, providing proof that targeting multiple UPS activities simultaneously could be an attractive approach to overcoming artemisinin resistance. These data further validate the parasite UPS as a target to both enhance artemisinin action and potentially overcome resistance. Lastly, we confirm that DUB inhibitors can be developed into in vivo antimalarial drugs with promise for activity against all of human malaria and could thus further exploit their current pursuit as anticancer agents in rapid drug repurposing programs.The increase in the concentration of electrolytes for secondary batteries has significant advantages in terms of physicochemical and electrochemical performance. This study aims to explore a highly concentrated electrolyte for Na-ion batteries using a ternary salt system. The eutectic composition of the Na[N(SO2F)2]-Na[N(SO2F)(SO2CF3)]-Na[SO3CF3] ternary molten salt system increases solubility into an organic solvent, enabling the use of highly concentrated electrolytes for Na-ion batteries. The ternary salt system achieved concentrations of 5.0 m (m = mol kg-1) with propylene carbonate (PC), 2.9 m with dimethoxyethane, 2.0 m with ethylene carbonate/dimethyl carbonate, and 3.9 m with ethylene carbonate/diethyl carbonate. The highly concentrated electrolyte of 5.0 m in PC suppressed Al corrosion and exhibited better oxidative stability. Stable electrochemical performance using hard carbon/NaCrO2 in the full-cell configuration introduces a new strategy to explore highly concentrated electrolytes for secondary batteries.ConspectusMetal-organic and covalent-organic frameworks (MOFs/COFs) have been extensively studied for fundamental interests and their promising applications, taking advantage of their unique structural properties, i.e., high porosity and large surface-to-volume ratio. However, their electronic and magnetic properties have been somewhat overlooked because of their relatively poor performance as conductive and/or magnetic materials. Recent experimental breakthroughs in synthesizing two-dimensional (2D) π-conjugated MOFs/COFs with high conductivity and robust magnetism through doping have generated renewed and increasing interest in their electronic properties. Meanwhile, comprehensive theoretical studies of the underlying physical principles have led to discovery of many exotic quantum states, such as topological insulating states, which were only observed in inorganic systems. Especially, the diversity and high tunability of MOFs/COFs have provided a playground to explore novel quantum physics and quantum chemed, which greatly extends the pool of materials beyond inorganic crystals for hosting exotic band structures.A novel CO2-responsive cotton as an eco-friendly adsorbent derived from poly(4-acryloyloxybenzophenone-co-2-(dimethylamino) ethyl methacrylate) and cotton was fabricated via a facile and fast dip-coating method. As expected, upon CO2 stimulation, the protonated cotton presented CO2-induced "on-off" selective adsorption behaviors toward anionic dyes owing to electrostatic interactions. The adsorption isotherms and kinetics of the CO2-responsive cotton toward anionic dyes obeyed the Langmuir isotherm and pseudo-second-order kinetics models, respectively. It is noteworthy that the CO2-responsive cotton exhibited high adsorption capacity and ultrafast adsorption rate toward anionic dyes with the maximum adsorption capacities of 1785.71 mg g-1 for methyl orange (MO), 1108.65 mg g-1 for methyl blue (MB), and 1315.79 mg g-1 for naphthol green B (NGB), following the adsorption equilibrium times of 5 min for MO, 3 min for MB, and 4 min for NGB. Moreover, the CO2-responsive cotton also exhibited high removal efficiency toward anionic dyes in synthetic dye effluent. Additionally, the CO2-responsive cotton could be facilely regenerated via heat treatment under mild conditions and presented stable adsorption properties even after 15 cycles. Finally, the as-prepared CO2-responsive cotton exhibited outstanding antibacterial activity against E. coli and S. aureus. In summary, this novel CO2-responsive cotton can be viewed as a promising eco-friendly adsorbent material for potential scalable application in dye-contaminated wastewater remediation.The micro-nanofibers prepared by the electrospinning technique can be used as a good container for loading healing agents. The core-shell electrospun nanofibers with polyacrylonitrile as the outer shell and tannic acid (TA) and tung oil as the core healing agents were synthesized by a coaxial electrospinning method and exhibited pH-sensitive ability. The nanofibers as additives were added to an epoxy resin coating as a self-healing coating. The morphological stability of the electrospun nanofibers were observed by a scanning electron microscope and a transmission electron microscope. Fourier transform infrared spectroscopy and fluorescence microscopy reveal that the successful synthesis and uniform distribution of core-shell fibers. The mechanical properties test revealed that the tensile properties of the coating could be improved by adding nanofibers. The infrared mapping test, energy-dispersive spectrometry, and X-ray photoelectron spectroscopy, which were carried out on the scratched part of the coating, proved the release of the healing agent in the damaged part. TA forms a protective film on the exposed metal surface through molecular adsorption under acidic conditions. Meanwhile, the curing of tung oil can effectively compensate into the microcracks to form a TA protective film, which could improve the self-healing performance. As the tung oil dries and solidifies in the alkaline solution, the cross-linking effect of the molecules is combined to form a tight film and strength the self-healing ability. TA as an acidic healing agent and tung oil as an alkaline healing agent played the role of pH-sensitive products in healing the cracked coating. The self-healing rates of coating immersing in 3.5 wt % acidic NaCl solution and alkaline solution were 81.6 and 71.2%, respectively. The composite coating shows a great pH-sensitive self-healing ability to heal the cracked coating.Micelles of Pluronic F108 (EO132PO50EO132)/P104 (EO27PO61EO27) surfactant mixtures swollen with toluene were found to template silica nanotubes that formed double-helical structures under appropriately selected aqueous acidic solution conditions. In particular, the double-helical nanotube structure (DHNTS) formed as a main product at 15 °C for 30-37.5 wt % of Pluronic P104 in a surfactant mixture, with 35 wt % being particularly suitable. The formation of DHNTSs appears to involve a spontaneous wrapping of micelle-templated nanotubes around one another, while a similar structure was known to form only under confinement of anodic alumina pores of appropriate diameter. In addition to DHNTSs, other helical or circular structures, such as a helical nanotube tightly wrapped around a straight nanotube, or nanotube(s) wrapped around a sphere, were observed in many cases as minor components. DHNTSs formed as a major component at a well-defined proportion of silica precursor to surfactant at 15 °C, while the relative amount of the swelling agent and the hydrochloric acid concentration could be varied considerably.