Klostercostello1437

Transition-metal sulfides are key cathode materials for thermal batteries used in military applications. However, it is still a big challenge to prepare sulfides with good electronic conductivity and thermal stability. Herein, we rapidly synthesized a Co-doped NiS2 micro/nanostructure using a hydrothermal method. We found that the specific capacity of the Ni1-xCo x S2 micro/nanostructure increases with the amount of Co doping. Under a current density of 100 mA cm-2, the specific capacity of Ni0.5Co0.5S2 was about 1565.2 As g-1 (434.8 mAh g-1) with a cutoff voltage of 1.5 V. Owing to the small polarization impedance (5 mΩ), the pulse voltage reaches about 1.74 V under a pulse current of 2.5 A cm-2, 30 ms. Additionally, the discharge mechanism was proposed by analyzing the discharge product according to the anionic redox chemistry. Furthermore, a 3.9 kg full thermal battery is assembled based on the synthesized Ni0.5Co0.5S2 cathode materials. Notably, the full thermal battery discharges at a current density of 100 mA cm-2, with an operating time of about 4000 s, enabling a high specific energy density of around 142.5 Wh kg-1. In summary, this work presents an effective cathode material for thermal battery with high specific energy and long operating life.Germanium nanomaterials are important for their potential applications in many fields. However, current synthetic technologies usually involve either high-cost explosive reagents or complicated facilities, which make the mass production especially challenging. In this report, a method was developed to synthesize nano-Ge materials conveniently, realized by decomposing LiZnGe in air at room temperature. The process is nontoxic, inexpensive, and, most of all, very suitable for large-scale production in combination with ball milling. The as-prepared Ge nanomaterials are crystalline whose structures can be flexibly tuned through the ball milling syntheses. As the lithium-ion battery anode, such Ge nanomaterials exhibited long-term cycle ability with high specific capacity as well as excellent rate performance. These results not only provided a very efficient way to prepare nano-Ge in lab or even promising industry production but also suggested a universal method in synthesizing the tetrels elemental nanomaterials.Cell culture on microcarriers emerges as an alternative of two-dimensional culture to produce large cell doses, which are required for cell-based therapies. Herein, we report a versatile and easy solvent-free greener fabrication process to prepare microcarriers based on a biosourced and compostable polymer. The preparation of the microcarrier core, which is based on poly(L-lactide) crystallization from a polymer blend, allows us to easily tune the density, porosity, and size of the microparticles. A bioadhesive coating based on biopolymers, devoid of animal protein and optimized to improve cell adhesion, is then successfully deposited on the surface of the microcarriers. The ability of these new microcarriers to expand human adipose-derived stromal cells with good yield, in semistatic and dynamic conditions, is demonstrated. Finally, bead-to-bead cell transfer is shown to increase the yield of cell production without having to stop the culture. These microcarriers are therefore a promising and efficient green alternative to currently existing systems.Carbon monoxide (CO), an important gas signaling molecule, demonstrated various physiological and pathological functions by regulating the ion flux of biological channels. Herein, inspired by the CO-regulated K+ channel in vivo, we propose a smart CO-responsive nanosensor through the redox reaction strategy. Such nanosensor demonstrated an outstanding CO specificity and selectivity with high ion rectification (∼9) as well as excellent stability and recyclability. Therefore, these results will provide a new direction for the design of nanochannel-based sensors for future practical and biological applications.Pluripotency of a DNA tetrahedron (DNATT) has made the iconic framework a compelling keystone in biosensors and biodevices. Herein, distinct from the well-tapped applications in substrate fabrication, we focus on exploring their tracing and signaling potentials. Selleck Futibatinib A homologous family of four isostructural DNATT, i.e., DNATTα/β/γ/δ, was engineered to form a sensor circuitry, in which a target-specific monolayer of thiolated DNATTγ pinned down the analyte jointly with the reciprocal DNATTδ into a sandwich complex; the latter further rallied an in situ interdigital relay of biotinylated DNATTα/β into a microsized hyperlink dubbed polyDNATT. Its scale and growth factors were illuminated rudimentarily in transmission electron microscopy and confocal laser scanning microscopy. Using a nonsmall-cell lung cancer-related microRNA (hsa-miR-193a-3p) as the subject, a compound DNA-backboned construct was synthesized, fusing all building blocks together. Its superb tacticity and stereochemical conformality avail the templating of a horseradish peroxidase train, which boosted the paralleled catalytic surge of proton donors, resulting in an attomolar detection limit and a broad calibration range of more than seven orders of magnitude. Such oligomerization bested the conventional hybridization chain reaction laddering at both biomechanical stability and stoichiometric congruency. More significantly, it demonstrates the flexibility of DNA architectures and their multitasking ability in biosensing.The hexagonal close packed surface of gold shows a 22 × 3 "herringbone" surface reconstruction which makes it unique among the (111) surfaces of all metals. This long-range energetically favored dislocation pattern appears in response to the strong tensile stress that would be present on the unreconstructed surface. Adsorption of molecular and atomic species can be used to tune this surface stress and lift the herringbone reconstruction. Here we show that herringbone reconstruction can be controllably lifted in ultrahigh vacuum at cryogenic temperatures by precise hot electron injection in the presence of hydrogen molecules. We use the sharp tip of a scanning tunneling microscope (STM) for charge carrier injection and characterization of the resulting chain nanostructures. By comparing STM images, rotational spectromicroscopy and ab initio calculations, we show that formation of gold atomic chains is associated with release of gold atoms from the surface, lifting of the reconstruction, dissociation of H2 molecules, and formation of surface hydrides. Gold hydrides grow in a zipper-like mechanism forming chains along the [11̅0] directions of the Au(111) surface and can be manipulated by further electron injection. Finally, we demonstrate that Au(111) terraces can be transformed with nearly perfect terrace selectivity over distances of hundreds of nanometers.Comprehensive profiling of lipid species in a biological sample, or lipidomics, is a valuable approach to elucidating disease pathogenesis and identifying biomarkers. link2 Currently, a typical lipidomics experiment may track hundreds to thousands of individual lipid species. However, drawing biological conclusions requires multiple steps of data processing to enrich significantly altered features and confident identification of these features. Existing solutions for these data analysis challenges (i.e., multivariate statistics and lipid identification) involve performing various steps using different software applications, which imposes a practical limitation and potentially a negative impact on reproducibility. Hydrophilic interaction liquid chromatography-ion mobility-mass spectrometry (HILIC-IM-MS) has shown advantages in separating lipids through orthogonal dimensions. However, there are still gaps in the coverage of lipid classes in the literature. To enable reproducible and efficient analysis of HILIC-IM-MS lipidomics data, we developed an open-source Python package, LiPydomics, which enables performing statistical and multivariate analyses ("stats" module), generating informative plots ("plotting" module), identifying lipid species at different confidence levels ("identification" module), and carrying out all functions using a user-friendly text-based interface ("interactive" module). To support lipid identification, we assembled a comprehensive experimental database of m/z and CCS of 45 lipid classes with 23 classes containing HILIC retention times. Prediction models for CCS and HILIC retention time for 22 and 23 lipid classes, respectively, were trained using the large experimental data set, which enabled the generation of a large predicted lipid database with 145,388 entries. Finally, we demonstrated the utility of the Python package using Staphylococcus aureus strains that are resistant to various antimicrobials.The plasmonic nanolaser is a class of lasers with the physical dimensions free from the optical diffraction limit. In the past decade, progress in performance, applications, and mechanisms of plasmonic nanolasers has increased dramatically. link3 We review this advance and offer our prospectives on the remaining challenges ahead, concentrating on the integration with nanochips. In particular, we focus on the qualifications for electrical pumping, energy consumption, and ultrafast modulation. At last, we evaluate the strategies for on-chip source construction design and further threshold reduction to achieve a long-term room-temperature electrically pumped plasmonic nanolaser, the ultimate goal toward practical applications.Wettability is one of the most critical interfacial properties of any surface. Surfaces with special wettability such as superwetting or superantiwetting are being intensively explored for their wide-ranging applicability by a biomimetic exploration of unusual wetting phenomena in nature. This study provides a green water-infused superoleophobic composite membrane by boosting bacteria nanocellulose growth on a reinforcement fibrous substrate. It was shown that this versatile antifouling membrane is capable of removing water from surfactant-stabilized oil-in-water micro/nanoemulsions and helps to isolate the oil fraction with very high filtration efficiency. The renewable membrane based on bacteria nanocellulose matrices can vastly improve current technologies by cultivating a naturally occurring soft materials approach with lubricious conformal interfaces to effectively and simply cover suitable surfaces.High crystalline quality coaxial GaInN/GaN multiple quantum shells (MQSs) grown on dislocation-free nanowires are highly in demand for efficient white-/micro-light-emitting diodes (LEDs). Here, we propose an effective approach to improve the MQS quality during the selective growth by metal-organic chemical vapor deposition. By increasing the growth temperature of GaN barriers, the cathodoluminescent intensity yielded enhancements of 0.7 and 3.9 times in the samples with GaN and AlGaN spacers, respectively. Using an AlGaN spacer before increasing the barrier temperature, the decomposition of GaInN quantum wells was suppressed on all planes, resulting in a high internal quantum efficiency up to 69%. As revealed by scanning transmission electron microscopy (STEM) characterization, the high barrier growth temperature allowed to achieve a clear interface between GaInN quantum wells and GaN quantum barriers on the c-, r-, and m-planes of the nanowires. Moreover, the correlation between the In incorporation and structure features in MQS was quantitatively assessed based on the STEM energy-dispersive X-ray spectroscopy mapping and line-scan profiles of In and Al fractions.