Danielsnymand0503

Single-photon light detection and ranging (LiDAR), offering single-photon sensitivity and picosecond time resolution, has been widely adopted for active imaging applications. Long-range active imaging is a great challenge, because the spatial resolution degrades significantly with the imaging range due to the diffraction limit of the optics, and only weak echo signal photons can return but mixed with a strong background noise. https://www.selleckchem.com/products/PP242.html Here we propose and demonstrate a photon-efficient LiDAR approach that can achieve sub-Rayleigh resolution imaging over long ranges. This approach exploits fine sub-pixel scanning and a deconvolution algorithm tailored to this long-range application. Using this approach, we experimentally demonstrated active three-dimensional (3D) single-photon imaging by recognizing different postures of a mannequin model at a stand-off distance of 8.2 km in both daylight and night. The observed spatial (transversal) resolution is ∼5.5 cm at 8.2 km, which is about twice of the system's resolution. This also beats the optical system's Rayleigh criterion. The results are valuable for geosciences and target recognition over long ranges.We propose and evaluate a method to estimate the DC bias required for AC-coupled Kramers-Kronig receivers. The proposed method is based on a spectral analysis of the reconstructed signal without requiring an evaluation of the signal quality. The proposed method is described analytically and demonstrated experimentally using 12.5 GBaud 16-ary quadrature-amplitude modulated signals in back-to-back and after 100 km transmission.A multi-pulse sampling dual-comb ranging (MS-DCR) method is proposed in this paper. Four sampling pulses and two signal pulses separated in the time domain are generated in a repetition period by fiber delay. Through multi-pulse linear optical sampling, eight cross-correlation interferograms (IGMs) are generated in an updating period. The proposed method realizes the multiplication of IGMs so that additional ranging results can be obtained. The experimental results demonstrate that we suppress any random noise by averaging the ranging results and improve the precision of the time-of-flight (TOF) method and carrier-wave interferometric (CWI) method simultaneously. The precision of TOF is improved from 3.85 µm to 1.39 µm without time averaging and that of CWI is improved from 25 nm to 11 nm. The TOF result can link to the interferometric phase with 15 ms averaging, and a precision of 0.48 nm is reached with 0.5 s averaging. The proposed technique overcomes the limitations of linear optical sampling in conventional dual-comb interferometers and achieves faster and higher precision distance measurements without decreasing the unambiguity range.In this paper we propose a graphene-based metasurface structure that can exhibit tunable electromagnetically-induced-transparency-like (EIT) spectral response at mid-infrared frequencies. The metasurface structure is composed of two subwavelength mono-layer graphene nano-disks coupled with a mono-layer graphene nano-strip. We show that the coupling of the nano-disks' dipole resonance with the quadrupole resonance of the nano-strip can create two split resonances with a transparency window in between at any desired center frequency within a wide frequency range. We show that such an EIT-like response can also be dynamically shifted in frequency by adjusting the Fermi-level of the graphene through external voltage control, which provides convenient post-fabrication tunability. In addition, the performance of such a metastructure for sensing the refractive index of the surrounding medium is analyzed. The simulation results show that its sensitivity can reach 3016.7 nm/(RIU) with a FOM exceeding 12.0. Lastly, we present an analysis of the slow light characteristics of the proposed device, where the group index can reach as large as 200. Our design provides a new miniaturized sensing platform that can facilitate the development of biochemical molecules testing, etc.In a supersonic turbulent boundary layer, the characteristics of the refractive index cannot be described well using a statistical approach. Therefore, we theoretically and numerically investigate the evolution of the total orbital angular momentum (OAM) and the spiral spectrum of the OAM mode with respect to space and time when a Laguerre-Gaussian beam propagates through a supersonic turbulent boundary layer. The numerical results of a shock-wave-turbulent boundary layer interaction flow in a supersonic 24° compression ramp with a 2.9 Ma free stream are used. The distribution of the refractive index is obtained by direct numerical simulation of the Navier-Stokes equations. Our results show that the total OAM varies and the spiral spectrum of the OAM mode is asymmetric.Optical coherence tomography (OCT) has been an important and powerful tool for biological research and clinical applications. However, speckle noise significantly degrades the image quality of OCT and has a negative impact on the clinical diagnosis accuracy. In this paper, we propose a novel speckle noise suppression technique which changes the spatial distribution of sample beam using a special optical chopper. Then a series of OCT images with uncorrelated speckle patterns could be captured and compounded to improve the image quality without degradation of resolution. Typical signal-to-noise ratio improvement of ∼6.4 dB is experimentally achieved in tissue phantom imaging with average number n = 100. Furthermore, compared with conventional OCT, the proposed technique is demonstrated to view finer and clearer biological structures in human skin in vivo, such as sweat glands and blood vessels. The advantages of low cost, simple structure and compact integration will benefit the future design of handheld or endoscopic probe for biomedical imaging in research and clinical applications.A silicon nitride micro-ring resonator with a loaded Q factor of 1.4 × 106 at 780 nm wavelength is demonstrated on silicon substrates. This is due to the low propagation loss waveguides achieved by optimization of waveguide sidewall interactions and top cladding refractive index. Potential applications include laser frequency stabilization allowing for chip-scale atomic systems targeting the 87Rb atomic transition at 780.24 nm. The temperature dependent wavelength shift of the micro-ring was determined to be 13.1 pm/K indicating that a minimum temperature stability of less than ±15 mK is required for such devices for wavelength locking applications. If a polyurethane acrylate top cladding of an optimized thickness is used then the micro-ring could effectively be athermal, resulting in reduced footprint, power consumption, and cost of potential devices.