Camachomogensen1456

Contaminants, such as pathogens or non-living substances, can spread through the interaction of their carriers (e.g., air and surfaces), which constitute a network. The structure of such networks plays an important role in the contaminant spread. We measured the contaminant spreading efficiency in different networks using a newly defined parameter. We analyzed basic networks to identify the effect of the network structure on the contaminant spread. The spreading efficiency was highly related to some network parameters, such as the source node's average path length and degree, and considerably varied with the transfer rate per inter-node interaction. We compared the contaminant spreading efficiencies in some complex networks, namely scale-free, random, regular-lattice, and bipartite networks, with centralized, linear, and fractal networks. The contaminant spreading was particularly efficient in the fractal network when the transfer rate was ~0.5. Two categories of experiments were performed to validate the effect of the network structure on contaminant spreading in practical cases (I) gas diffusion in multi-compartment cabins (II) bacteria transfer in multi-finger networks. The gas diffusion could be well estimated based on the diffusion between two compartments, and it was considerably affected by the network structure. U0126 Meanwhile, the bacteria spread was generally less efficient than expected.Transmission of pathogens through air is a critical pathway for the spread of airborne diseases, as airborne pathogenic microorganisms cause several harmful infections. This review summarizes the occurrence, transmission, and adverse impacts of airborne pathogenic microorganisms that spread over large distances via bioaerosols. Air cleaning technologies have demonstrated great potential to prevent and reduce the spread of airborne diseases. The recent advances in air cleaning technologies are summarized on the basis of their advantages, disadvantages, and adverse health effects with regard to the inactivation mechanisms. The application scope and energy consumption of different technologies are compared, and the characteristics of air cleaners in the market are discussed. The development of high-efficiency, low-cost, dynamic air cleaning technology is identified as the leading research direction of air cleaning. Furthermore, future research perspectives are discussed and further development of current air cleaning technologies is proposed.Nanoplastics can be ingested by organisms and penetrate biological barriers to affect multiple physiological functions. However, few studies have focused on the effects of nanoplastics on the mammalian immune system. We evaluated the effects and underlying mechanism of nanoplastics of varying particle sizes and surface charges on murine splenic lymphocytes. We found that nanoplastics penetrated into splenic lymphocytes and that nanoplastics of a diameter of 50 nm were absorbed more efficiently by the cells. The nanoplastics decreased cell viability, induce cell apoptosis, up-regulated apoptosis-related protein expression, elicited the production of reactive oxygen species, altered mitochondrial membrane potential, and impaired mitochondrial function. Positively charged nanoplastics exerted the strongest toxicity. Negatively charged and uncharged nanoplastics caused oxidative stress and mitochondrial structural damage in lymphocytes, while positively charged nanoplastics induced endogenous apoptosis directly. Moreover, nanoplastics inhibited the expression of activated T cell markers on the T cell surface, while inhibiting the differentiation of CD8+ T cells and the expression of helper T cell cytokines. In terms of the mechanism, a series of key signaling molecules in the pathways of T cell activation and function were markedly down-regulated after exposure to nanoplastics.Welding fumes (WFs) can cause occupational pneumonoconiosis and other diseases in workers. WFs have complex chemical composition and morphology depending on the welding conditions. The WF surface is a key factor affecting those diseases. The objective of this study was to establish an analytical method focused on characterizing individual WFs and welding slags (WSs) formed during CO2 arc welding processes for knowledge acquisition of risk assessment. Especially, the characterization was focused on the elemental distributions near the surfaces obtained using fluxing agents and size of the WFs. WFs were collected using personal samplers. After welding, WS was also collected. The fluxing elemental distribution (e.g., Bi) near the surfaces WS and WFs were analyzed through scanning electron microscopy and energy-dispersive X-ray spectroscopy. As a result, some of the micron-sized spherical particles (SPs) grew by incorporating nanosized primary particles composed of other metal species. The fluxing agents formed elemental distribution patterns on the SP surface. Bi were dotted in an agglomerate. Mn amount in WS depends on Mn amount in the WFs. These results obtained through the analysis of both the WS and WF surface as well as the particle sizes will facilitate the establishment of exposure assessment models.In the present work, a detailed thermo-kinetics of hazardous sulfur-rich sludge generated from the corn processing industry was performed for acquiring the optimum parameters for the efficient recovery of sulfur using the evaporation-condensation technique. Sulfur in the sludge was found to be 79 ± 3% (wt%) as estimated by the Bureau of Indian Standards method. A weight loss of 77 ± 3% was found in the active devolatilization zone from ≈ 200-400 °C. The online FTIR confirmed the evolution of mainly sulfur vapors (S8) along with some sulfur dioxide (SO2) and disulfur (S2). The thermogravimetric data (TG) was used to evaluate the kinetic parameters with the help of model-free methods, and Z-master plots determined additional insight into the reaction mechanism. Furthermore, the calculated activation energy (Ea) was used to determine the thermodynamic feasibility. The average Ea values appraised by FM, FWO, sDAEM, and ST models were 55.43, 72.04, 62.33, and 62.67 kJ mol-1, respectively. Overall, 91.2% of sulfur was successfully recovered at 400 °C, having 99 ± 0.5% purity. The approximate cost analysis of the sulfur recovery process was also estimated to check the economic viability. Recovered sulfur could be directly used for industrial and agricultural applications without any further purification.Triazole fungicides are highly effective pesticides widely used in plant protection, which has caused potential hazards to human health and ecological safety. To fully understand their potential hepatotoxicity, we first analyzed the transcriptome profiles in HepG2 cells treated with five triazole fungicides (hexiconazole (HEX), tebuconazole (TEB), propiconazole (PRO), cyproconazole (CYP), and difenoconazole (DIF)), and found that these pesticides remarkably affected estrogen signaling pathways, especially estrogen synthesis. Furthermore, we found that TEB, CYP, PRO and DIF had agonistic activity towards estrogen receptor alpha (ERα) and elucidated the binding mode of triazole ligands with ERα using the reporter gene assay and molecular docking. Four triazole fungicides regulated eight major genes involved in estrogen synthesis (StAR, CYP11A1, 3βHSD2, CYP17, CYP19, CYP3A4, CYP1A2 and SCP2) and stimulated the secretion of 17β-estradiol (E2). Finally, we assessed possible metabolic outcomes caused by abnormal estrogen synthesis, and found that triazole fungicides affected the metabolism of various macromolecules (such as lipid, amino acid, and carbohydrate) and signal transduction. These findings will provide new insights into endocrine-disrupting effects of triazole fungicides and highlight their potential ecological and health risks.Graphene oxide (GO) nanosheets, often embedded in nano-composites, have been studied as promising materials for waste water purification, in particular to adsorb heavy metals and cationic organic contaminants. However, a broader range of potential applications of GO is still unexplored. This work investigated the potential applicability of GO for enhanced in-situ soil washing of secondary sources of groundwater contamination (i.e. the controlled recirculation of a washing GO suspension via injection/extraction wells). The laboratory study aimed at quantifying the capability of GO to effectively remove adsorbed methylene blue (MB) from contaminated sand. The tests were conducted in simplified conditions (synthetic groundwater at NaCl concentration of 20 mM, silica sand) to better highlight the key mechanisms under study. The results indicated a maximum sorption capacity of 1.6 mgMB/mgGO in moderately alkaline conditions. Even though the adsorption of MB onto GO slightly reduced the GO mobility in the porous medium, a breakthrough higher than 95% was obtained for MB/GO mass ratios up to 0.5. This suggests that a very high recovery of the injected particles should be also expected in the field.Industrial contaminants such as dyes and intermediates are released into water bodies, making the water unfit for human use. At the same time large amounts of food wastes accumulate near the work places, residential complexes etc. polluting the air due to putrefaction. The need of the hour lies in finding innovative solutions for dye removal from wastewater streams. In this context, the article emphasizes adoption or conversion of food waste materials, an ecological nuisance, as adsorbents for the removal of dyes from wastewaters. Adsorption, being a well-established technique, the review critically examines the specific potential of food waste constituents as dye adsorbents. The efficacy of food waste-based adsorbents is examined, besides addressing the possible adsorption mechanisms and the factors affecting phenomenon such as pH, temperature, contact time, adsorbent dosage, particle size, and ionic strength. Integration of information and communication technology approaches with adsorption isotherms and kinetic models are emphasized to bring out their role in improving overall modeling performance. Additionally, the reusability of adsorbents has been highlighted for effective substrate utilization. The review makes an attempt to stress the valorization of food waste materials to remove dyes from contaminated waters thereby ensuring long-term sustainability.Organophosphorus pesticides (OPPs) are one of the most widely used types of pesticide that play an important role in the production process due to their effects on preventing pathogen infection and increasing yield. However, in the early development and application of OPPs, their toxicological effects and the issue of environmental pollution were not considered. With the long-term overuse of OPPs, their hazards to the ecological environment (including soil and water) and animal health have attracted increasing attention. Therefore, this review first clarified the classification, characteristics, applications of various OPPs, and the government's restriction requirements on various OPPs. Second, the toxicological effects and metabolic mechanisms of OPPs and their metabolites were introduced in organisms. Finally, the existing methods of degrading OPPs were summarized, and the challenges and further addressing strategy of OPPs in the sustainable development of agriculture, the environment, and ecology were prospected.