Abildgaardrhodes9189

After 14 days of remediation of Sb(III) contaminated soil, the Toxicity Characteristic Leaching Procedure (TCLP)-leached concentrations of Sb(III) were reduced by 86%, 91% and 94% when the material dosages were 1%, 2% and 3%, respectively. Immobilization of Sb(III) in soil resulted in a conversion of antimony speciation from more easily bioavailable species to less bioavailable species, further contributing to reduce the environmental risk of antimony. The results indicate that ferro-magnesium bimetallic organic frameworks may serve as a kind of promising materials for the immobilization of Sb(III) in contaminated soil and groundwater.It is extremely important to analyze the contaminative behaviors of Perfluoroalkyl acids (PFAAs) due to their serious threats to urban environments which are closely related to humans. Current study aimed to explore the distribution, source apportionment and ecological risk assessment of PFAAs in surface water from Shijiazhuang, China. The concentrations of ∑PFAAs ranged from 19.5 to 125.9 ng/L in the investigation area. Perfluorobutanesulfonic acid (PFBS) and perfluoropentanoic acid (PFPeA) were the predominant contaminants (mean value 14.3 ng/L and 16.6 ng/L, respectively). The distribution of PFAAs according to geospatial analysis and hierarchical clustering analysis (HCA) showed that higher levels of ∑PFAAs were detected in the southern surface water of Shijiazhuang and there was a stepwise decrease from the wet season to the dry season. Furthermore, based on source apportionment, the dominant potential sources were found to be wastewater treatment plant (WWTP) effluents and industrial discharge. The risk quotients (RQs) revealed low ecological risks of all PFAAs for aquatic organisms in Shijiazhuang surface water. Collectively, this study provided basic data for regulatory strategies for controlling PFAA pollutions in urban surface water.Syngas is a clean energy carrier and a major industrial feedstock. In this paper, syngas was produced via biomass chemical looping gasification (CLG) process. Hematite, the most common Fe-based oxygen carrier (OC), was modified with different metal oxides (CeO2, CaO and MgO) by the impregnation method. The hematite modified by CeO2, CaO and MgO was namely as CeO2-hematite (CeO2-H), CaO-hematite (CaO-H) and MgO-hematite (MgO-H), respectively. The introduction of CeO2, CaO and MgO enhanced the reactivity of lattice oxygen of hematite. The optimum condition for syngas production had been explored as the mass ratio of oxygen carrier to biomass (O/B) of 0.2, the mass ratio of steam to biomass (S/B) of 0.75 and temperature of 800°C in the biomass CLG process. The CeO2-H exhibited the most wonderful performance compared to that for CaO-H and MgO-H. The crystal composition of OC influenced greatly in the CLG process. CeFeO3 had a good oxygen mobility property and lattice oxygen releasing capacity due to the most oxygen vacancy distributed on the OC surface and the most active lattice oxygen, which is conducive to the biomass chemical looping gasification process for syngas production, leading to the highest gasification efficiency of 95.86% and gas yield of 1.20 m3/kg of the three. Cyclic test proved that CeO2-H had well sintering resistance and cyclic performance.Simultaneous anammox and denitrification (SAD) is an efficient approach to treat wastewater having a low C/N ratio; however, few studies have investigated a combination of SAD and partial nitritation (PN). In this study, a lab-scale up-flow blanket filter (UBF) and zeolite sequence batch reactor (ZSBR) were continuously operated to implement SAD and PN advantages, respectively. The UBF achieved a high total nitrogen (TN) removal efficiency of over 70% during the start-up stage (days 1-50), and reached a TN removal efficiency of 96% in the following 90 days (days 51-140) at COD/NH4+-N ratio of 2.5. The absolute abundance of anammox bateria increased to the highest value of 1.58 × 107 copies/µL DNA; Comamonadaceae was predominant in the UBF at the optimal ratio. Meanwhile, ZSBR was initiated on day 115 as fast nitritation process to satisfy the influent requirement for the UBF. The combined process was started on day 140 and then lasted for 30 days, during the combined process, between the two reactors, the UBF was the main contributor for TN (66.5% ± 4.5%) and COD (71.8% ± 4.9%) removal. These results demonstrated that strong SAD occurred in the UBF when following a ZSBR with in-situ NOB elimination. This research presents insights into a novel biological nitrogen removal process for low C/N ratio wastewater treatment.Urban villages are unique residential neighborhoods in urban areas in China. Roof tanks are their main form of water supply, and water quality deterioration might occur in this system because of poor hygienic conditions and maintenance. In this study, water samples were seasonally collected from an urban village to investigate the influence of roof tanks as an additional water storage device on the variation in the microbial community structure and pathogenic gene markers. Water stagnation in the roof tank induced significant decreases in chlorine (p less then 0.05), residual chlorine was as low as 0.02 mg/L in spring. Propidium monoazide (PMA)-qPCR revealed a one-magnitude higher level of total viable bacterial concentration in roof tank water samples (2.14 ± 1.81 × 105 gene copies/mL) than that in input water samples (3.57 ± 2.90 × 104 gene copies/mL, p less then 0.05), especially in spring and summer. In addition, pathogenic fungi, Mycobacterium spp., and Legionella spp. were frequently detected in the roof tanks. Terminal users might be exposed to higher microbial risk induced by high abundance of Legionella gene marker. Spearman's rank correlation and redundancy analysis showed that residual chlorine was the driving force that promoted bacterial colonization and shaped the microbial community. It is worth noted that the sediment in the pipe will be agitated when the water supply is restored after the water outages, which can trigger an increase in turbidity and bacterial biomass. Overall, the findings provide practical suggestions for controlling microbiological health risks in roof tanks in urban villages.Simultaneous elimination of As(III) and Pb(II) from wastewater is still a great challenge. In this work, an iron-sulfur codoped biochar (Fe/S-BC) was successfully fabricated in a simplified way and was applied to the remediate the co-pollution of As(III) and Pb(II). The positive enthalpy indicated that the adsorption in As-Pb co-pollution was an endothermic reaction. The mechanism of As(III) removal could be illustrated by surface complexation, oxidation and precipitation. In addition to precipitation and complexation, the elimination mechanism of Pb(II) also contained ion exchange and electrostatic interactions. Competitive and synergistic effects existed simultaneously in the co-contamination system. The suppression of As(III) was ascribed to competitive complexation of the two metals on Fe/S-BC, while the synergy of Pb(II) was attributed to the formation of the PbFe2(AsO4)2(OH)2. Batch experiments revealed that Fe/S-BC had outstanding ability to remove As(III) and Pb(II), regardless of pH dependency and interference by various coexisting ions. The maximum adsorption capacities of the Fe/S-BC for As(III) and Pb(II) were 91.2 mg/g and 631.7 mg/g, respectively. Fe/S-BC could be treated as a novel candidate for the elimination of As(III)-Pb(II) combined pollution.Pt catalysts with nitrogen-doped graphene oxide (GO) as support and CeO2 as promoter were prepared by impregnation method, and their catalytic oxidation of formaldehyde (HCHO) at room temperature was tested. The Pt-CeO2/N-rGO (reduced GO) with a mass fraction of 0.7% Pt and 0.8% CeO2 exhibited an excellent catalytic performance with the 100% conversion of HCHO at room temperature. Physicochemical characterization demonstrated that nitrogen-doping greatly increased the defect degree and the specific surface area of GO, enhanced the dispersion of Pt and promoted more zero-valent Pt. The synergistic effect between CeO2 and Pt was also beneficial to the dispersion of Pt. Nitrogen-doping promoted the production of more Ce3+ ions, generating more oxygen vacancies, which was conducive to O2 adsorption. As a result, the catalyst exhibited enhanced redox properties, leading to the best catalytic activity. Finally, an attempt to propose the reaction mechanism of HCHO oxidation has been made.As the main contributor of the formation of particulate matter as well as ozone, volatile organic compounds (VOCs) greatly affect human health and the environmental quality. Catalytic combustion/oxidation has been viewed as an efficient, economically feasible and environmentally friendly way for the elimination of VOCs. Supported metal catalyst is the preferred type of catalysts applied for VOCs catalytic combustion because of the synergy between active components and support as well as its flexibility in the composition. The presence of support not only plays the role of keeping the catalyst with good stability and mechanical strength, but also provides a large specific surface for the good dispersion of active components, which could effectively improve the performance of catalyst as well as decrease the usage of active components, especially the noble metal amount. Mesoporous molecular sieves, owing to their large surface area, unique porous structures, large pore size as well as uniform pore-size distribution, were viewed as superior support for dispersing active components. This review focuses on the recent development of mesoporous molecular sieve supported metal catalysts and their application in catalytic oxidation of VOCs. The effect of active component types, support structure, preparation method, precursors, etc. on the valence state, dispersion as well as the loading of active species were also discussed and summarized. Moreover, the corresponding conversion route of VOCs was also addressed. This review aims to provide some enlightment for designing the supported metal catalysts with superior activity and stability for VOCs removal.The short-term impacts of urban air pollution on the platelet-lymphocyte ratio (PLR) and neutrophil-lymphocyte ratio (NLR) remain obscure. In this study, we included 3487 urban adults from the Wuhan-Zhuhai cohort. Individual inhalation exposure to air pollutants was estimated by combining participants' daily breath volume and ambient concentrations of six air pollutants (including fine particulate matter (PM2.5), inhalable particulate matter (PM10), nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO) and ozone (O3)). The cumulative impacts were assessed by applying lag structures of up to 7 days before the survey date. Associations of air pollutants with PLR and NLR were assessed using a linear mixed model and Bayesian kernel machine regression (BKMR) model. We found that PLR was negatively related to PM2.5 (lag02-lag06), PM10 (lag02-lag07), NO2 (lag02-lag07), and SO2 (lag03-lag05) and NLR was negatively related to PM10 (lag05 and lag07). In the BKMR model, a negative joint association between the six-air-pollutant mixture and PLR and NLR was observed, whereas PM10 and NO2 appeared to be more important than the other pollutants in the mixture. The negative impact of air pollutants was stronger in males, participants with lower body mass index ( less then 24 kg/m2), those cooking meals at home, drinkers, and non-exercisers. In conclusion, short-term exposure to air pollutants is significantly related to PLR and NLR in peripheral blood. K975 PLR and NLR may provide new insight into the molecular mechanism underlying the adverse health impact of air pollutants.