Aaenvedel7075

Tips For Replacing a Window Handle

It is easy to replace your window handle in the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.

Remove the screw covers from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you're getting the correct size replacement.

1. Measure the Spindle Length

If you're replacing a window handle, it's crucial to determine the size of the spindle correctly. It can affect the tightness or looseness of the handle and whether the handle will lock properly into the frame of the window. The spindle is a metallic shaft that connects the handle to the lock in the frame of the window. The spindle is available in either the standard 8mm industry cross-section or older versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always that way. It is crucial to verify the measurements prior to buying the handle you want to purchase.

Remove the handle. This is done by turning the handle to the open position and taking off two screws that hold the handle in place (which are often concealed behind plastic caps that must be removed). Once the handle is removed, measure the distance from the base to the end. This will give you the measurement required to purchase a replacement.

There are many options to consider when selecting a new window handle from sleek chrome that fits into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms or even the more traditional Tudor cottages with curved monkey tail latches! The options are endless but the most important thing to do is choose a style that complements your home.

Espag handles are usually installed to uPVC window frames and are always the same size with a 43mm central. Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles made of Cadenza are different in size as they have an angled blade that functions with a multi-point locking mechanism within the window.

When you are choosing a handle for your window, you should also consider the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.

2. Take the handle off

A window handle that falls out can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is, you can fix a uPVC handle yourself. You will require only the most basic hand tools as well as some time to complete the process.

The first step is to have to open the window and make sure that it is in an unlocked position. Then, you need to remove the screws that hold the handle in position. Once these caps are removed, you are able working on the removal of the handle itself.

The handle itself is fixed to a spindle within the window frame. This is either fixed by screws or pins, depending on the type of handle. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. www.repairmywindowsanddoors.co.uk of handles are found on casement windows, including aluminum ones. You can lock the handles with a key to prevent unauthorised access from outside. Or you can lock the handles by turning them clockwise.

To take the handle off, you'll need a flat blade screwdriver to remove the clip that holds the handle in place. Once the clip is released, the handle should be able to slide off the spindle. After the handle is removed, you'll need to take a measurement of the length of the spindle to ensure that the new handle will fit.

Once you have the correct size, you are able to screw the new handle in place. It is important to make sure that the new handle is firmly attached and that it turns in the correct way (clockwise for open and counterclockwise for closed). It is also important to check that it has not been fitted upside down.

Replace the screw caps. Once you've completed this step, you should test your handle to make sure that it's working properly. It is also recommended to test the locking mechanism by moving the handle from the locked position, and then back again.

3. Remove the Screws

A uPVC window handle is a crucial component of every home and is usually the first item to show signs of wear and wear or damage. This could be due to natural causes or from regular use and sometimes even malicious damage caused by opportunistic criminals who might wish to open a locked window and gain access to your home. A simple repair can fix the issue and prevent it from occurring again.

uPVC handles can also be difficult to open if the locking mechanism isn't functioning properly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism rather than the entire handle. This could save you money.

Once you've removed your old handle, you'll need to remove the screws that were holding it in place. These screws are usually located on the inside of the handle base. It is possible to use a screwdriver to accomplish this. Be cautious not to over tighten the handle, as this can cause it to become loose.

You'll then have to locate the fixing pins or screws that hold the new handle in place. Again these are likely to be located on the inside of the handle base and you will need to use either a screwdriver or pair of pliers to remove the screws. After you have removed them, you'll be required to replace the caps on the screws in the event that you want to do so, and then test the new handle to confirm that it's functioning properly.

If you're ready to put in the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it into the right position. If you're looking to replace the screws ensure that the handle is in an open position and that any screws are securely fixed. Then you can enjoy the newly installed window handle. This should help you avoid expensive window and door replacements in the near future. If you'd like more assistance in this, or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Fit the New Handle

The process of replacing a broken window handle or updating it is easy and can be completed within only a few simple steps. Identifying the kind of window handle, determining the length of its spindle and knowing what tools you'll require to complete the task are essential. Safety is always the first priority when working with tools and windows. It is also essential to be patient and follow the steps with care to ensure that you have a functional handle that is safe to use.

To begin, find the screws that hold the window handle in place. Remove these while holding the handle firmly to prevent it from falling and causing an injury. Once the screws have been removed, you can place them in a safe location to be replaced in the future.

After removing the old handle, you can now begin to put in your new one. The handle must be a perfect fit for it to function properly and keep the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole in your window mechanism, ensuring that it fits securely.

The last step is to replace the caps on the screws and then test the handle to make sure it works. If you aren't satisfied with the results, or if your window does not shut or open properly, call our experts for help.





The majority of UK homes have uPVC Windows. This means that a lot of them will require replacement at some point due to wear and tear or breakage. Anyone with some DIY knowledge can accomplish the task. The most crucial aspect to the success of the procedure is making sure you're using a handle which matches your window's size and design. If you're unsure about what kind of handle you'll require, please reach out to our team, who will be able to guide you through the options available.