Lohmannreyes4606

A high-sensitivity and large-capacity free space optical (FSO) communication scheme based on the soliton microcomb (SMC) is proposed. Using ultra-large bandwidth stabilized SMC with a frequency interval of 48.97 GHz as the laser source, 60 optical wavelengths modulated by 2.5 Gbit/s 16-Pulse position modulation (PPM) are transmitted in parallel. A corresponding outfield high-sensitivity 150 Gbit/s FSO communication experiment based on the SMC was carried out with 1 km space distance. Our experimental results show that the best sensitivity of the single comb wavelength which has higher OSNR can reach -52.62 dBm, and the difference is only 1.38 dB from the theoretical limit under the BER of 1 × 10-3 without forward error correction (FEC). In addition, at BER of 1 × 10-3, 16-PPM has a higher received sensitivity of 6.73dB and 3.72dB compared to on-off keying (OOK) and differential phase shift keying (DPSK) respectively. Meanwhile, taking the advantage of multi-channel SMC, 60 × 2.5 Gbit/s can achieve 150 Gbit/s large-capacity free-space transmission. For comparison, commercially available single-wavelength laser based FSO communication system have also been performed in the outfield. The outfield experimental results demonstrated the feasibility of high-sensitivity, large-capacity PPM FSO communication based on SMCs and provided a new perspective for the future development of large-capacity, long-haul FSO communication.Cerenkov luminescence tomography (CLT) provides a powerful optical molecular imaging technique for non-invasive detection and visualization of radiopharmaceuticals in living objects. However, the severe photon scattering effect causes ill-posedness of the inverse problem, and the location accuracy and shape recovery of CLT reconstruction results are unsatisfactory for clinical application. Here, to improve the reconstruction spatial location accuracy and shape recovery ability, a non-negative iterative three operator splitting (NNITOS) strategy based on elastic net (EN) regularization was proposed. NNITOS formalizes the CLT reconstruction as a non-convex optimization problem and splits it into three operators, the least square, L1/2-norm regularization, and adaptive grouping manifold learning, then iteratively solved them. After stepwise iterations, the result of NNITOS converged progressively. Meanwhile, to speed up the convergence and ensure the sparsity of the solution, shrinking the region of interest was utilized in this strategy. H-1152 mouse To verify the effectiveness of the method, numerical simulations and in vivo experiments were performed. The result of these experiments demonstrated that, compared to several methods, NNITOS can achieve superior performance in terms of location accuracy, shape recovery capability, and robustness. We hope this work can accelerate the clinical application of CLT in the future.In this paper, we proposed a tunable K/W-band OFDM integrated radar and communication system based on Optoelectronic Oscillator (OEO) for intelligent transportation. All-optical signal processing including amplitude asymmetric filtering and quadratic phase manipulating is applied in OEO to achieve a high-frequency and tunable self-excited oscillation, which supports the K/W-band OFDM signal generation. Its product of maximum detection range and communication capacity is cB/4Δf (m·Gbaud), where c is light speed and Δf is subcarrier spacing of OFDM. A proof-of-concept experiment is carried out in K-band with bandwidth B = 2 GHz and W-band with bandwidth B = 10 GHz. The range resolution ΔR, detection range Rmax and communication capacity C of 0.075 m, 75 m, 12.8 Gbps, and 0.015 m, 300 m, 32 Gbps are experimentally demonstrated in K/W-band respectively.We investigate the discrete Talbot self-imaging effect in Floquet superlattices based on a mesh of directional couplers with periodically varying separation between waveguides, both theoretically and numerically. The modulated discreteness of the lattices sets strong constraints to ensure the Talbot effect generation. We show that discrete Talbot effect occurs only if the incident periods are N = 1, 2, and 4 in dispersive regimes of the Hermitian superlattices. In both dynamic localized and rectification regimes, self-imaging effect can occur for arbitrary input period N. For the rectification case, Talbot distance equals the input period. In the regime of dynamical localization, the Talbot distance remains unchanged irrespective of the pattern period. For non-Hermitian Floquet superlattices, due to the non-zero imaginary part of quasi-energy spectrum arising at the center of the Brillouin zone, where the mode degeneracy occurs, Talbot revival is not preserved when the input period is an even number, and exists only as N = 1 in the dispersive regime. The theoretical calculations and numerical simulations verify each other completely.We present the wafer-level characterization of a 256-channel optical phased array operating at 1550 nm, allowing the sequential testing of different OPA circuits without any packaging steps. Using this, we establish that due to random fabrication variations, nominally identical circuits must be individually calibrated. With this constraint in mind, we present methods that significantly reduce the time needed to calibrate each OPA circuit. In particular, we show that for an OPA of this scale, a genetic optimization algorithm is already >3x faster than a simple hill climbing algorithm. Furthermore, we describe how the phase modulators within the OPA may be individually characterized 'in-situ' and how this information can be used to configure the OPA to emit at any arbitrary angle following a single, initial calibration step.Time-resolved spectroscopy can provide valuable insights in hydrogen chemistry, with applications ranging from fundamental physics to the use of hydrogen as a commercial fuel. This work represents the first-ever demonstration of in-situ femtosecond laser-induced filamentation to generate a compressed supercontinuum behind a thick optical window, and its in-situ use to perform femtosecond/picosecond coherent Raman spectroscopy (CRS) on molecular hydrogen (H2). The ultrabroadband coherent excitation of Raman active molecules in measurement scenarios within an enclosed space has been hindered thus far by the window material imparting temporal stretch to the pulse. We overcome this challenge and present the simultaneous single-shot detection of the rotational H2 and the non-resonant CRS spectra in a laminar H2/air diffusion flame. Implementing an in-situ referencing protocol, the non-resonant spectrum measures the spectral phase of the supercontinuum pulse and maps the efficiency of the ultrabroadband coherent excitation achieved behind the window. This approach provides a straightforward path for the implementation of ultrabroadband H2 CRS in enclosed environment such as next-generation hydrogen combustors and reforming reactors.In this work, a near-perfect broadband absorber, consisting of Fe, MgF2, Fe, TiO2 and MgF2 planar film, is proposed and investigated through simulations and experiments. The Fe material is first applied in the multilayer film structure, and it is proved to be more favorable for achieving broadband absorption. MgF2 and TiO2 are chosen as anti-reflection coatings to decrease unwanted reflections. The proposed absorber is optimized by employing a hybrid numerical method combining the transfer matrix method (TMM) and the genetic algorithm (GA). Under normal incidence conditions, the average absorption of the absorber is 97.6% in the range of 400 to 1400 nm. The finite difference time domain (FDTD) method and phase analysis reveal that the anti-reflection property and the Fabry-Perot resonance result in broadband absorption performance. Furthermore, when an additional Fe-MgF2 layer is inserted on the bottom Fe layer, an average absorption of 97.9% in the range of 400 to 2000 nm can be achieved. Our approach could be of vital significance for numerous applications involving solar energy.Light-trapping design is a good strategy to obtain ultra-thin solar cells without sacrificing conversion efficiency. If applied to III-V compound multi-junction solar cells (MJSCs), it not only can greatly reduce the cell cost and weight, but also improve its radiation tolerance when operating in space. This paper formulates all subcell absorptance in an arbitrary N-junction solar cell with an ideal front textured surface and perfect rear mirror, including the effects of complex absorption and luminescence coupling in the stack. Taking the well-known InGaP/GaAs/InGaAs triple-junction solar cell (3J) for instance, the ultra-thin design and the conversion efficiency both in radiative limit and that with subcell internal radiative efficiency below-unity are predicted. Our results show that such front-textured 3J with top-subcell thickness varying from 200 to 500 nm can enhance light absorption so significantly that more than 28% of top-subcell, 56% of middle-subcell, and 90% of bottom-subcell thickness will be cut down when compared with the smooth-surfaced 3J. Typically, (350 nm, 315 nm, 28 nm) is recommended as the optimal design for the front-textured 3J with an experimental efficiency of over 38%. For the same benchmarks on photocurrent of 15.1 mA/cm2 or detailed balance limit of 44%, the minimum total thickness (all subcells only) in the front-textured 3J is only 1453 nm, that is even 71% of that in the rear-textured 3J, quantitatively revealing front texturization has a greater potential for material cut-down than rear texturization. Finally, the impacts of non-ideal scattering texturization on cell performance and ultra-thin design are also discussed. This work provides theoretical guidance for experimental studies on ultra-thin and high-efficient MJSCs with various light-trapping strategies.A phase-only hologram generated through the convolution neutral network (CNN) which is trained by the low-frequency mixed noise (LFMN) is proposed. Compared with CNN based computer-generated holograms, the proposed training dataset named LFMN includes different kinds of noise images after low-frequency processing. This dataset was used to replace the real images used in the conventional hologram to train CNN in a simple and flexible approach. The results revealed that the proposed method could generate a hologram of 2160 × 3840 pixels at a speed of 0.094 s/frame on the DIV2K valid dataset, and the average peak signal-to-noise ratio of the reconstruction was approximately 29.2 dB. The results of optical experiments validated the theoretical prediction. The reconstructed images obtained using the proposed method exhibited higher quality than those obtained using the conventional methods. Furthermore, the proposed method considerably mitigated artifacts of the reconstructed images.The stabilization of lasers on ultra-stable optical cavities by the Pound-Drever-Hall (PDH) technique is a widely used method. The PDH method relies on the phase-modulation of the laser, which is usually performed by an electro-optic modulator (EOM). When approaching the 10-16 fractional frequency stability level, this technology requires an active control of the residual amplitude modulation (RAM) generated by the EOM in order to bring the frequency stability of the laser down to the thermal noise limit of the ultra-stable cavity. In this article, we report on the development of an active system of RAM reduction based on a free space EOM, which is used to perform PDH-stabilization of a laser on a cryogenic silicon cavity. A minimum RAM instability of 1.4 × 10-7 is obtained by employing a digital servo that stabilizes the EOM DC electric field, the crystal temperature and the laser power. Considering an ultra-stable cavity with a finesse of 2.5 × 105, this RAM level would contribute to the fractional frequency instability at the level of about 5 × 10-19, well below the state of the art thermal noise limit of a few 10-17.