Dillardrichmond9155

Replacement UPVC Door Handles

Whether you're replacing your handles or want to add a bit of extra security, you'll choose the perfect handle for your door. These upvc handles are easy to install and meet the required 92mm centres for multipoint locks.

The most important measurements to consider are backplate fixing centres and key hole dimensions and levers. Compare these measurements carefully with your existing measurements prior to placing an order.

Lever/Pad

Lever pad door handles are made up of the lever handle on one side and a paddle-shaped handle on the other. They are designed to be used with key wind locks however, they can also be adapted to multipoint split spindle door locks (though you'll need an additional dual spindle lock case).





Our range of upvc handle lever pads are available in a variety of finishes and these will be shown in the drop down list once you have found the correct handle for your door. Not all styles of handles are available in every finish and you should always check the technical drawings and sizes sections for the particular product you are looking to ensure that you are getting the right size and fit.

When you are choosing a new set of upvc lever pad door handles it is essential to ensure that they correspond to the PZ (distance between the spindle of the handle and the center of the cylinder hole) of your current multipoint door locks, since they have to be in the same line to allow doors to remain locked, whether from the inside or outside. The handles we offer are designed to work with most standard cylinder locks, however it is advisable to double-check before making a purchase.

If you are looking to upgrade to dual spindle levers you will need to remove the handles you have already installed and take apart the lock case. This will require an extra split inline cylinder. You can purchase these separately. We have included a technical diagram in the images of each product.

Once you have removed the screws that are holding the handle on your door, it is a good idea to loosen them, and then inspect the mechanism to determine what condition it is in. You may need to loosen the screws a bit more when they aren't tight. Then you can take off the spindle and handle and put in your new door handle made of upvc. Before screwing the handle into position, it is recommended to ensure that it is in the proper position. You can do this by placing your finger into the space between the door frame and the door handle to make sure that it is level.

Lever/Lever

Lever door handles are an a multi-point lock using a Euro cylinder and can be found on a majority of double doors made of aluminium, upvc doors, and some wooden doors. They come in two types, with a lever on the interior and a paddle on the outside. Sprung - these have a spring cassette fitted within the backplate that helps move the handle lever to a horizontal position. Non-sprung: These do not include a mechanism that can spring the handle lever into a horizontal position.

To repair the door handle lever that is sliding it is necessary to locate the hole or detent access pin. It's usually a small hole or protruding ring or rectangle that is located on the base of the handle plate. Once you have located it, loosen the set screw with a screwdriver and remove it to allow the lever, allowing it to return to the horizontal position.

Once the handle is in a horizontal orientation, you can re-install the screws and tighten them to make sure the handle remains fixed to the base plate. You should also consider applying an adhesive that locks the screw threads to improve the grip and prevent them from becoming loose over time.

Drooping lever door handles can be caused by many factors. The most frequent cause is that the fixings are too tight, causing the lever bearing to pull against the door. It is also possible that the levers have not been operated at a right angle, which compresses the latch mechanism and prevents it from fully springing into operation.

A common cause of a spring lever not operating properly is the spring not being in the correct position on the backplate. To determine if the handle returns to horizontal, simply operate it.

If your door handles are loose it is important to identify the issue fast, as it could cause excessive wear on the screws and possibly to the handle falling off of the base plate. It is also recommended to tighten any loose screws regularly to stop them from becoming looser.

Lever/Snib

These upvc handles are also called "Snib handle sets" and have an snib lock button located at the top of the door lever. If you don't have a dummy lock device you can use this to secure the door. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's center and lever or the lock centre) door lock. We also stock a range of door handles with 68PZ from brands like Ferco and Fab & Fix.

Change your door handle is a cost-effective option to modernize your home, whether you're replacing handles that are in use or fitting new ones to doors you've built in your house. There are a variety of styles of door handles made of upvc that include traditional levers on backplate, curved or straight short latches, and knob handles that resemble dummy knobs for multi point locks which are ideal for French doors.

Lever on backplate handles are often rectangular in shape but there are also oval or circular versions that are referred to as rose door handles. These types of door handles come with the knob or lever on a backplate that sits behind the knob or lever and is often referred to as a rosette, although some back plates can be detached to be concealed for fixing.

There is upvc door handle replacement ewell repairmywindowsanddoors.co.uk of chrome and coloured finishes available for these handles to match your door and other hardware, including hinges, knobs and bolts. Some handles are supplied with grub screws that help firmly attach the knob or lever to the spindle. Some handles come with bathroom spindles which are suitable for bathroom locks. They also come with a thumbturn release mechanism and can be used on bathroom doors.

Mortise

The tubular latch is most likely to be the cause of this in the event that your door handle is slammed shut. There may be a few factors that could cause this, one of which is a simple lack of lubrication on the latch plate. It is possible to solve this problem by opening the door and spraying lubricant onto the handle and locking. Or, it could be that the latch plate has become separated from the backplate. This could be more complicated and will require a specialist to fix it.

A multipoint handle system is the best solution for a stuck door handle. These handles are mounted through the faceplate and operated with the use of a key or thumb turn knob that triggers the cam that locks the deadbolt. The handles come in a variety of sizes to suit different kinds of uPVC door and in various attractive finishes that match existing hardware. The handles can be bought via the internet or from the local locksmith and can be installed with clear instructions.

If you want to replace the handle set, you'll need to determine the PZ dimension of your cylinder. This is the distance in millimetres between the inner edge of the door frame and the centre of the hole for the handle. You'll also need the type of lock on your door, regardless of whether it's a mortise lock or a hook lock. Once you have these measurements, the simplest method to locate the correct handles is to search by brand option on the website. This will help you narrow down your options, and then you can select the correct size.

A typical handle set includes an arm, two screws of different lengths, drill guides and instructions for installation. Smarter versions, like the Igloohome Smart Mortise 2+ include a mortice lock with a keypad. These are more complex models and are ideal for professional installers or very adept DIYers. Some handle sets include various other accessories, such as weather strips, which can be used to improve the look of the door.