Rankinpatel3881
Due to limited field size of Magnetic Resonance Linear Accelerators (MR-Linac), some treatments could require a dual-isocenter planning approach to achieve a complete target coverage and thus exploit the benefits of the online adaptation. This study evaluates the dosimetric accuracy of the dual-isocenter intensity modulated radiation therapy (IMRT) delivery technique for MR-Linac.
Dual-isocenter multi leaf collimator (MLC) and couch accuracy tests have been performed to evaluate the delivery accuracy of the system. A mono-isocenter plan delivered in clinical practice has then been retrospectively re-planned with dual-isocenter technique. The dual-isocenter plan has been re-calculated and delivered on a 3-dimensional (3D) ArcCHECK phantom and 2-dimensional (2D) films to assess its dosimetric accuracy in terms of gamma analysis. Clinical and planning target volume (CTV and PTV respectively) coverage robustness was then investigated after the introduction of±2mm and±5mm positioning errors by shifting the couch.
MLC and couch accuracy tests confirmed the system accuracy in delivering a dual-isocenter irradiation. 2D/3D gamma analysis results occurred always to be above 95% if considered a gamma criteria 1%/2 mm and 1%/1 mm respectively for the 2D and 3D analysis. The mean variations for CTV D98% and PTV V95% were 0.2% and 1.1% respectively when positioning error was introduced separately in each direction, while the maximum observed variations were 0.9% (CTV) and 3.7% (PTV).
The dosimetric accuracy of dual-isocenter irradiation has been verified for MR-Linac, achieving accurate and robust treatment strategy and improving dose conformality also in presence of targets whose extension exceeds the nominal maximum field size.
The dosimetric accuracy of dual-isocenter irradiation has been verified for MR-Linac, achieving accurate and robust treatment strategy and improving dose conformality also in presence of targets whose extension exceeds the nominal maximum field size.Brain tissue is a heterogeneous material, constituted by a soft matrix filled with cerebrospinal fluid. The interactions between, and the complexity of each of these components are responsible for the non-linear rate-dependent behaviour that characterises what is one of the most complex tissue in nature. Here, we investigate the influence of the cutting rate on the fracture properties of brain, through wire cutting experiments. selleck kinase inhibitor We also present a computational model for the rate-dependent behaviour of fracture propagation in soft materials, which comprises the effects of fluid interaction through a poro-hyperelastic formulation. The method is developed in the framework of finite strain continuum mechanics, implemented in a commercial finite element code, and applied to the case of an edge-crack remotely loaded by a controlled displacement. Experimental and numerical results both show a toughening effect with increasing rates, which is linked to the energy dissipated by the fluid-solid interactions in the region surrounding the crack tip.The progressive falling of barriers among disciplines is opening unforeseen scenarios in diagnosis and treatment of cancer diseases. By sharing models and mature knowledge in physics, engineering, computer sciences and molecular biology, synergistic efforts have in fact contributed in the last years to re-think still unsolved problems, shedding light on key roles of mechanobiology in tumors and envisaging new effective strategies for a precise medicine. The use of ultrasounds for altering cancer cells' program is one of the most attracting grounds to be explored in oncophysics, although how to administer mechanical energy to impair selected cell structures and functions simultaneously overcoming the critical trade-off between the impact of the cure and the patient risk still remains an open issue. Within this framework, by starting from the theoretical possibility of selectively attacking malignant cells by exploiting the stiffness discrepancies between tumor and healthy single cells, first proposed by Fraldiectively induced in cancer cells as a function of the global volume fraction of the cell species, paving the way for future engineered treatment protocols.
Bioceramic root canal sealers like BioRoot RCS have received significant attention for use in endodontics. The addition of a nanophase material like multi-walled carbon nanotubes (MWCNTs) and titanium carbide (TC) to its matrix combined with pressureless sintering might have the potential for improved physiochemical, microstructure, and compressive strength properties.
ology MWCNTs and TC nanomaterials were added at a percentage of 1wt% to a definite weight of pristine BioRoot RCS. Two composites were prepared by ball milling followed by pressureless sintering in static nitrogen at temperatures 600°C and 800°C. The setting time, solubility, pH, compressive strength, and density were determined and compared to pristine BioRoot RCS. The microstructural properties of the composites were investigated by XRD, FTIR, Raman spectroscopy, and SEM.
The final setting time before and after sintering at 600°C of the composites was accelerated compared to Bioroot RCS (p=0.016). The solubility of Bioroot/TC sintered at 600°C was the lowest (p=0.07) and its compressive strength was the highest among the sintered samples (p=0.01). The incorporation of MWCNTs and TC had a significant increase in the compressive strength of Bioroot RCS (p<0.05).
The obtained results support the addition of nanomaterials to Bioroot RCS and the use of pressureless sintering.
The obtained results support the addition of nanomaterials to Bioroot RCS and the use of pressureless sintering.The disc of the temporomandibular joint (TMJ) is located between the mandibular condyle and temporal bone, and has an important load-bearing and stress absorbing function. The TMJ disc presents viscoelastic characteristics that are largely dependent on its collagen fibre and proteoglycan composition and organization. The purpose of this study is to investigate the possible effects of region-specific dynamic viscoelastic properties on stress relaxation during prolonged clenching. Two finite element models were used to compare the stress distribution within the TMJ disc, namely, one with uniform disc material property and another one with region-specific disc material properties. Similar results were observed in both models with slight differences in the location of maximum stress. Larger stresses were observed in all cases for the model with uniform disc material property. Moreover, the higher values for the model with uniform disc material property appeared in the lateral region, while in the model with region-specific disc properties, these values moved to the lateral and central region.
