Lynggaardaagaard8109

This study aims to investigate the effects of the angles created by the Kirschner wires (K-wires), which are applied in the percutaneous fixation of supracondylar humerus fractures with cross K-wire, with the fracture line on fracture stabilization.

The study was conducted on distal humerus fracture models. Medial and lateral K-wires were placed in the fracture models. The angle between the fracture line and the K-wire inserted from medial was represented by alpha (α), while the angle between the fracture line and the K-wires inserted from lateral was represented by beta (β). A combination of various angles (30°, 45°, and 60°) was used in each model, where no two models had the same combination of α and β, resulting in nine different wire configurations. The simulation program was used to simulate the effects of forces, which were applied on rotation, flexion and extension directions, on these models. We measured and compared the stress on the wires and the displacement of fractures under different force , increasing the insertion angle of both medial and lateral K-wires augments stabilization and reduces displacement, particularly against rotational deforming forces.

This study aims to evaluate the early- and mid-term shoulder and elbow functions and compare the union rates after the application of single plate and double plate for the treatment of humerus shaft nonunions.

This retrospective study included 56 patients (36 males, 20 females; mean age 53.8±9.5; range, 28 to 68 years) treated with double plate (n=25) and single plate (n=31) osteosynthesis between October 2012 and January 2016. Surgical treatment of the nonunion was applied in the fourth month after the fracture at the earliest. Autograft taken from the iliac bone was applied during the surgery in all patients. Evaluation was performed using The University of California at Los Angeles (UCLA) Shoulder Score, Mayo Elbow Performance Score (MEPS), Visual Analog Scale (VAS), Constant Shoulder Score, and Disabilities of the Arm Shoulder and Hand (DASH) questionnaire.

The mean postoperative follow-up time was 40.7±9.6 (range, 25 to 58) months. No statistically significant difference was determined in respect od double plate fixations for surgical treatment of humeral shaft nonunions. However, superior clinical results were obtained in the early recovery phase of shoulder and elbow functions with double plate fixation.

This study aims to investigate the radiological and clinical outcomes of four-part intraarticular distal radius fractures treated with a volar anatomically locked plate and 2 mm low-profile plates using both the volar and dorsal approaches.

This retrospective study included 20 patients (8 males, 12 females; mean age 47±12.1; range, 25 to 67 years) who received open reduction and internal fixation with combined volar and dorsal plating to treat complex four-part distal radius fractures (shaft, radial styloid area, dorsal medial facet, volar medial facet) between May 2016 and January 2019. According to Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification, all fractures were 2R3-C3. According to Melone classification, one fracture was type 1, seven fractures were type 2a, three were type 2b, three were type 3 and six were type 4. The mean follow-up time was 21±7.5 (range, 12 to 36) months.

Union was achieved in all fractures. The mean tourniquet time was 103±12 (range, 90 to 130) minutes. The mean Disabilities of the Arm, Shoulder, and Hand questionnaire score was 10±9, and the mean Visual Analog Scale score was 2.1±0.9. According to Mayo wrist score, five patients had excellent, six had good, six had satisfactory and three had poor results. The mean grip strength was 25.2±9.2 (range, 15 to 40) kg and 78% of opposite side. Mean wrist flexion was 48.7°±15.3° (range, 30° to 80°), extension was 52.2°±17.2° (range, 25° to 80°), radio-ulnar deviation arc was 40.7°±6.9° (range, 30° to 55°), and mean forearm rotation arc was 152.3°±11° (range, 130° to 170°).

Plating method with a dual approach may be an alternative for four-part intraarticular distal radius fractures given its early mobility advantage and satisfactory functional and radiological results.

Plating method with a dual approach may be an alternative for four-part intraarticular distal radius fractures given its early mobility advantage and satisfactory functional and radiological results.

This study aims to mechanically compare five different extra-focal bi-cortical pin configurations (using two and three pins) employed for fixation of a simulated unstable extra-articular distal radius fracture with dorsal comminution using a sawbone model.

This in vitro mechanical study was conducted between June 2019 and July 2019. A standard fracture model (Arbeitsgemeinschaft für Osteosynthesefragen [AO] type 23-A3.3) was created using a fourth generation composite artificial radius bone. Five groups with two- and three-pin configurations were tested under axial, volar, and dorsal loading with a universal test device. Mean stiffness values were compared statistically.

Comparison of stiffness values from axial and volar loading tests between groups in paired comparison showed no statistically significant difference (p=0.194 and p=0.086, respectively). Dorsal loading tests showed statistically significant difference between the groups in pairwise comparison (p=0.002). this website Three-pin groups (Groups 3, 4, andests. When indicated, we suggest the use of a three-pin construct. Particularly in cases with a risk of volar angulation, we recommend a three-pin configuration with two divergent or convergent bi-cortical Kirschner wires.

This study aims to evaluate the clinical and radiological outcomes of diamond-shaped Kirschner (K)-wire fixation for the treatment of acute perilunate dislocation (PLD) or trans-scaphoid perilunate fracture dislocation (PLFD).

We performed a retrospective review of 18 patients (18 wrists; 17 males, 1 female; mean age 31.5±2.6 years; range, 18 to 47 years) treated for PLD/PLFD using a dorsal approach with the diamond-shaped K-wire fixation between November 2001 and September 2017. The mean follow-up of cohort was 27 (range, 13 to 74) months. Using a dorsal approach, open ligament repair and bone fixations were performed. Perilunate dislocation was reduced and the carpal bones and midcarpal joint were held in anatomical position using four K-wires transfixing the scapholunate (SL), lunotriquetral, scaphocapitate, and triquetrohamate joints in such a shape that each bone received two K-wires.

The mean range of motion and grip strength measured using a Jamar® dynamometer of the injured wrist compared to the uninjured extremity were 84.