Boltonmolloy8397

9 mg/g, and 66.5 mg/g (for aluminosilicate), and 186 mg/g, 140 mg/g, and 77.8 mg/g for (AlSi/NaY (20/80) composite), respectively. Ion exchange was regarded as a domain adsorption mechanism of metal ions in solution by zeolite; meanwhile, inner-surface complexation was domain one for aluminosilicate. Ion exchange and inner-surface complexation might be mainly responsible for adsorbing metal ions onto the AlSi/NaY composite. Pore-filling mechanism was a less important contributor during the adsorption process. The results of competitive adsorption under binary-components (Cu2+ and Sr2+) and ternary-components (Cu2+, Pb2+, and Sr2) demonstrated that the removal efficacy of target metals by the aluminosilicate, zeolite, and their composite remarkably decreased. The synthesized AlSi/NaY composite might serve as a promising adsorbent for real water treatment.An easy-to-use, pollution-free and reusable beaded NiOx(OH)y catalyst for improving hypochlorite oxidation was prepared by impregnating the mixture of persulfate and alkali over alumina and then reduced it with Ni2+. find more The effects of catalyst preparation conditions and reaction parameters on NaClO conversion rate and Ni2+ dissolution rate were studied. Impregnating the γ-Al2O3 beads in PS/OH- mixed solution with 0.59 M PS and PS/OH- molar ratio of 1.1, and then reducing with 0.8 M Ni2+ solution is the best condition for preparing catalyst. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The best catalytic layer is characterized by high content of chemisorbed oxygen which can be converted into atomic oxygen. The hypochlorite conversion rate increased with the catalyst dosage and reuse times, and decreased with available chlorine, while pH of hypochlorite solution had little effect on the conversion rate. After running stably for 120 h in continuous flow test, the chemisorbed oxygen content in the optimal catalytic layer decreased slightly. Atomic oxygen plays an important role in the decolorization of dye solution by NaClO/NiOx(OH)y system. The oxidant consumption cost of this process is much cheaper than Fenton reagent. The prepared catalyst has great potential in hypochlorite decomposition and wastewater treatment.The sewage treatment system in this study was operated with only the first stage of a French system of vertical wetlands, composed of two units in parallel and running with an extended feeding cycle (7 days). This research sought to evaluate and relate continuous variables measured in situ (dissolved oxygen (DO), pH and redox potential) throughout the feeding cycle, with measurements at distinct heights along the filter vertical profile. Additionally, the influence of the surface organic sludge deposit was investigated. A close link between the hydraulic behaviour and the effluent quality was verified, with both being related to the batch volume and the instantaneous hydraulic loading rate. The drop in DO as the feed days progressed could be related to the loss of hydraulic conductivity. A thicker sludge layer decreased the aeration capacity of the filter. The effluent was observed to be aerated when percolating through the medium. DO and pH data suggested that nitrification varied along the filter depth, the batch duration and the feed cycle. The monitored parameters may be indicative of the behaviour of other parameters.Ag-Cu ions in cooling water may inhibit the activity of sulfate-reducing bacteria and therefore provide solutions to microbiologically induced corrosion (MIC) problems, mainly caused by Desulfovibrio sp. To investigate this, the MIC behavior of Desulfovibrio sp. on 316L stainless steel in terms of growth and extracellular polymeric substances (EPS) production was investigated in the presence of Ag-Cu ions. Laboratory-scale systems were set up with final concentrations of 0.13 ppm Ag and 0.3 ppm Cu ions, as they are the frequently used doses for cooling waters, and operated over 720 hours. The corrosion rate was evaluated by gravimetric assay, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analyses. The growth of Desulfovibrio sp. was assessed by bacterial counting and EPS production. Ag-Cu ions in the biofilm were assessed by inductively coupled plasma - optical emission spectrometry (ICP-OES) and EDS-elemental mapping analyses. It was concluded that the ion concentrations used caused an increase in EPS production, especially of protein. The corrosion rate of the metal by Desulfovibrio sp. in the presence of ions was detected as being 29 times higher than that in the sterile medium with the ions after 720 hours. The results suggested that Desulfovibrio sp. exhibited more corrosive behavior in the presence of non-toxic concentrations of Ag-Cu ions.UV/Vis spectrometers are powerful tools for online monitoring of wastewater constituents and processes. However, most studies only focus on typical parameters such as chemical oxygen demand (COD) and total suspended solids. This work presents a multi-parameter approach for calibration of a UV/Vis spectrometer for online monitoring of sewer systems. Parameters studied include soluble and total COD, nitrate, ammonium, sulphate and orthophosphate, as well as total dissolved sulphide, bisulphide and hydrogen sulphide, because they are one of the main causes for odour and corrosion in sewer systems. Two calibration methods are compared multiple linear regression included in the manufacturer's software, and partial least square (PLS) computed using the pls package of the R library. Performance of the methods is evaluated for calibration and validation data sets employing four different criteria relative root mean square error (RMSErel), RMSE-observations standard deviation ratio, Nash-Sutcliffe efficiency and percentage bias. A method-parameter dependency was revealed during the calibration phase but, when predicting new data, the PLS method showed higher robustness for almost all parameters. Both methods were able to predict concentration trends associated with sewer processes, some of which are strongly correlated to the sulphide species.