Zobrazení zdroje stránky Yatesmurdock1616

The FBC system resulted in immobilization of ~80% of P as triangular or quadrangular pellets, which were verified to be high-purity vivianite crystals by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and extended X-ray absorption fine structure (EXAFS) spectroscopy. [https://www.selleckchem.com/products/filanesib.html see more] This study provides a pathway for efficient recovery of P as a value-added product (i.e., vivianite) from P-rich wastewaters.Biodegradable compounds can cause undesired microbial growth in drinking water systems and these compounds can originate from the water or pipe materials used in drinking water systems. The aim of our study was to determine the influence of different pipe materials on the microbial populations in water and biofilm under semi-stagnant conditions. The microbial communities in biofilm and water, which were in contact with seven different materials, were characterized by determining ATP concentrations, microbial composition gene copy numbers of some specific microbial groups. The ATP concentration in water and biofilm varied between the different materials with glass (negative control) less then copper less then PVCC less then PE-Xc less then PE-Xb less then PE-100 less then PVC-P. Gene copy numbers of Legionella spp., Mycobacterium spp., Pseudomonas spp., Aeromonas spp., fungi and Vermamoeba vermiformis were also higher for PVC-P and PE than for glass, copper and PVCC. The bacterial community composition in water and biofilm varied between materials as well. PERMANOVA and CAP analysis demonstrated that copper and PVC-P are different when compared to the other materials. Furthermore, bacterial community composition and ATP concentrations in water and biofilm were similar after eight and 16 weeks incubation, but differed from results obtained after one week. Finally, the ATP, the specific microbial groups and the bacterial community composition also differed between water and biofilm on each material. We conclude from our study that pipe material is an important factor that influences the biomass concentration, abundance of specific microorganisms and the bacterial community composition in distribution systems with unchlorinated drinking water.There is an ongoing debate around the effect of microaerobic/aerobic conditions on the wastewater treatment performance and stability of enriched purple phototrophic bacteria (PPB) cultures. It is well known that oxygen-induced oxidative conditions inhibit the synthesis of light harvesting complexes, required for photoheterotrophy. However, in applied research, several publications have reported efficient wastewater treatment at high dissolved oxygen (DO) levels. This study evaluated the impact of different DO concentrations (0-0.25 mg·L-1, 0-0.5 mg·L-1 and 0-4.5 mg·L-1) on the COD, nitrogen and phosphorus removal performances, the biomass yields, and the final microbial communities of PPB-enriched cultures, treating real wastewaters (domestic and poultry processing wastewater). The results show that the presence of oxygen suppressed photoheterotrophic growth, which led to a complete pigment and colour loss in a matter of 20-30 h after starting the batch. Under aerobic conditions, chemoheterotrophy was the donated-anaerobic conditions, but not under aerobic or even micro-aerobic conditions, as shown by continuously aerated tests controlled at undetectable DO levels. While their aerobic heterotrophic capabilities provide some resilience, at non-sterile conditions PPB cannot dominate when growing chemoheterotrophically, and will be outcompeted.Highly toxic iodinated phenolic by-products were frequently detected in the oxidative treatment and disinfection of iodine-containing water. Herein, it was found that three model iodinated phenolic disinfection byproducts (DBPs), 2-iodophenol, 4-iodophenol and 2,4,6-triiodophenol, were reactive with HOCl, and the reaction rate constants (at pH 7.0 and 25℃) were 1.86 ×102, 1.62 ×102 and 7.5 ×101 M-1s-1, respectively. When HOCl was in excess (HOCl/iodophenol = 40/1, [iodophenol]0 = 20 μM), acute toxicity of water sample containing iodophenols could be largely eliminated (&gt; 85%), with the conversion of iodophenols into stable and non-toxic iodate (IO3-) and iodinated and chlorinated aliphatic DBPs. Besides IO3-, seven kinds of aromatic intermediate products including iodophenols, chloroiodophenols, iodoquinones, chloroiodoquinones, chloroquinones, chlorophenols, and coupling products were detected. C-I bond of iodophenols was cleaved in the reaction and the resulted aromatic products were further transformed into chlorinated aliphatic DBPs [trichloromethane (TCM), trichloroacetic acid (TCAA), dichloroacetic acid (DCAA), and chloral hydrate (CH)] (mg/L level) and iodinated trihalomethanes (μg/L level). HOCl was effective for converting iodophenols into IO3- and less toxic chlorinated aliphatic DBPs. Considering that chlorine was widely used as disinfectant, transformation and toxicity alteration of emerging DBPs during chlorination/booster chlorination warrant further investigations.Authentication of the explosives in nuclear warheads is a key point for the global nuclear disarmament. In this paper, a detection method of the explosives in nuclear warheads based on API-TOF (associated α particle imaging - time of flight) is proposed. First, the basic principles and current research situation of API-TOF are introduced. Second, a numerical simulation platform of the detection method of the explosives in nuclear warheads based on API-TOF was established, and a numerical simulation study of the feasibility of this method was carried out. The research results show that, this method can detect the nuclides of 12C, 14N and 16O of the explosive in the nuclear warhead in 15 min, and reconstruct the carbon-oxygen number ratio and nitrogen-oxygen number ratio of the explosive accurately, and reconstruct the spatial distribution of the explosive nuclei with the explosive profile clearly discriminated in the reconstruction image. From the simulation results, the detection method of the explosive in the nuclear warhead based on API-TOF is confirmed.