Zobrazení zdroje stránky Terrydrake7118

Iron-clay-cyclodextrin composites were designed as sorbent catalysts to adsorb and oxidize pollutants from water. The clay-iron backbone served as a mechanical support and as a heterogeneous Fenton catalyst, and the cyclodextrin monomers or polymers cross-linked with polyfluorinated aromatic molecules were used to accommodate adsorption of the pollutants. The composite based on iron-clay-cyclodextrin-polymers (Fe-MMT-βCD-DFB) exhibited superior adsorption and degradation of the model pollutants, bisphenol A (BPA), carbamazepine (CBZ), and perfluorooctanoic acid (PFOA), compared to the monomer-based composite and the native iron clay. The variety of adsorption sites, such as the polyfluorinated aromatic cross-linker, cyclodextrin toroid, and iron-clay surface, resulted in high adsorption affinity toward all pollutants; BPA was primarily adsorbed to the cyclodextrin functional groups, CBZ showed high affinity toward the Fe-MMT surface and the Fe-MMT-βCD-DFB composite, whereas PFOA was adsorbed mainly to the βCD-DFB polymer. Degradation, using H2O2, was highly efficient, reaching over 90% degradation in 1 h for BPA and CBZ and ∼80% for PFOA. The composite also showed excellent degradation efficiency in a multicomponent system with all three model pollutants. Furthermore, the composite's activity remained steady for five consecutive cycles of adsorption and degradation. The ability to remediate a broad range of pollutants, and the high overall removal exhibited by this novel material, demonstrates the potential for future application in water remediation technologies.Tumor-associated macrophages (TAMs), a major player in the tumor microenvironment, were recently recognized as a potential therapeutic target. To date, very few anticancer drugs or drug-delivery systems were designed to target the TAMs. Inspired by the "eat me" signal, phosphatidylserine (PS), mediated phagocytic clearance of apoptotic bodies, in this study, the matrix metalloproteinase 2 (MMP2)-sensitive PS-modified nanoparticles were developed. In the design, the PS is externalized to the nanoparticles' surface only when the nanoparticles reach the MMP2-overexpressing tumor site, allowing for the TAM-specific phagocytosis. The nanoparticles' excellent macrophage/TAM selectivity was observed in various biological models, including various cell lines, coculture cells, coculture cell spheroids, zebrafish, and tumor-bearing mice. The nanoparticles' TAM specificity remarkably enhanced the TAM depletion capability of the loaded model drug, dasatinib, resulting in the improved anticancer activity. The MMP2-sensitive apoptotic body-mimicking nanoparticles might be a promising delivery tool for TAM-centered cancer diagnoses and treatments.An impurity doping in semiconductors is an important irreversible process of manipulating the electrical properties of advanced electron devices. Here, we report an unusual reversible dopant activation/deactivation phenomenon, which emerges at an interface between indium tin oxide (ITO) and single-crystalline oxide channel. We found that the interface electrical resistance between ITO electrodes and single-crystalline oxide nanowire channel can be repeatedly switched between a metallic state and a near-insulative state by applying thermal treatments in air or vacuum. Interestingly, this electrical switching phenomenon disappears when the oxide nanowire changes from the single-crystalline structure to the lithography-defined polycrystalline structure. Atmosphere-controlled annealing experiments reveal that atmospheric oxygen induces repeatable change in the interfacial electrical resistance. Systematic investigations on metal cation species and channel crystallinity demonstrate that the observed electrical switching is related to an interface-specific reversible Sn-dopant activation/deactivation of ITO electrode in contact with a single-crystalline oxide channel.The exploration of ternary Pt-based catalysts represents a new trend for the application of electrocatalysts in fuel cells. In the present study, intermetallic PtPbBi hexagonal nanoplates (HNPs) with a hexagonal close-packed structure have been successfully synthesized via a facile solvothermal synthesis approach. The optimized PtPbBi HNPs exhibited excellent mass activity in the ethanol oxidation reaction (8870 mA mg-1Pt) in an alkaline ethanol solution, which is 12.7 times higher than that of JM Pt/C. Meanwhile, the mass activity of PtPbBi HNPs in an ethylene glycol solution (10,225 mA mg-1Pt) is 1.85 times higher than that of JM Pt/C. In particular, its catalytic activity is better than that of most reported Pt-based catalysts. In addition, the optimized PtPbBi HNPs also show a better operational durability than commercial Pt/C. For the ethylene glycol oxidation reaction, a mass activity of 42.7% was retained even after a chronoamperometric test for 3600 s, which is rare among the reported Pt-based catalysts. By combining X-ray photoelectron spectroscopy and electrochemical characterization, we reveal the electron transfer between Pt, Pb, and Bi; this would lead to weakened CO adsorption and enhanced OH adsorption, thereby promoting the removal of toxic intermediates and ensuring that PtPbBi HNP samples have high activity and excellent stability. This work can inspire the design and synthesis of Pt-based nanocatalysts.Supramolecular materials have gained substantial interest for a number biological and nonbiological applications. However, for optimum utilization of these dynamic self-assembled materials, it is important to visualize and understand their structures at the nanoscale, in solution and in real time. Previous approaches for imaging these structures have utilized super-resolution optical imaging methods such as STORM, which has provided important insights, but suffers from drawbacks of complex sample preparation and slow acquisition times, thus limiting real-time in situ imaging of dynamic processes. We demonstrate a noncovalent fluorescent labeling design for STED-based super-resolution imaging of self-assembling peptides. [https://www.selleckchem.com/products/ly333531.html check details] This is achieved by in situ, electrostatic binding of anionic sulfonates of Alexa-488 dye to the cationic sites of lysine (or arginine) residues exposed on the peptide nanostructure surface. A direct, multiscale visualization of static structures reveals hierarchical organization of supramolecular fibers with sub-60 nm resolution.