Zobrazení zdroje stránky Ochoaryan0112

Furthermore, the GO/CS/Cu-POM nanocomposite also displayed superior performance for removal of methylene blue (MB, 96.86%), gentian violet (GV, 97.77%), basic fuchsin (BF, 96.47%), tetracycline (TC, 78.92%) and norfloxacin (NC, 76.26%). Moreover, the main process of dye removal by GO/CS/Cu-POM was controlled by chemisorption. More importantly, the GO/CS/Cu-POM nanocomposite indicated good biocompatibility to human umbilical vein endothelial cells. Current work provides an effective strategy to design multifunctional POM-based composites for water purification and environmental protection.Due to the complex of oxygen reduction reaction (ORR), designing catalysts with multicatalytic centers is considered as a promising way for boosting the ORR. Herein, a multicatalytic centers electrocatalyst Fe3C/Mn3O4 encased by N-doped graphitic layers (FeMn PDA-900) is synthesized using iron manganese Prussian blue analogues and dopamine as the precursor. It exhibits a half-wave potential (E1/2) of 0.86 V for ORR and yields of H2O2 lower than 5% in 0.1 M KOH. Moreover, the prepared catalyst has also shown high catalytic ORR performance in both acidic and neutral electrolyte solutions, which exhibits the potential application in both the proton exchange membrane fuel cell and the microbial electrolysis cell. It is found that the good performance can be well explained by proton-coupled electron transfer mechanism due to the multicatalytic centers from Fe-Nx, Fe3C and Mn3O4 for providing enough active sites at the same time and the N-doped graphitic layers as a bridge for facilitating the electron transfer between the interfaces of Fe3C/Mn3O4 nanoparticles, which paves the way for protons and electrons transfer simultaneously and rapidly, and thus lowing the energy barrier and facilitating the ORR process. Therefore, FeMn PDA-900 is a promising candidate to replace precious metal-based ORR electrocatalysts at the whole pH range.<br /><br /> Conventional synthesis methods of polymeric nanoparticles as drug delivery systems are based on the use of large amounts of organic solvents, hence requiring several steps for the obtaining of waterborne dispersions. In view of the need for new environmentally friendly methods, emulsion polymerization and their related techniques are a good alternative for the production of monodispersed waterborne dispersions of biodegradable nanoparticles in a cleaner, reproducible and faster manner.<br /><br /> Herein, the miniemulsion polymerization technique at low temperature using poly(2-ethyl-2-oxazoline) as surfactant has been developed for poly(hydroxyethyl methacrylate-lactic acid) and poly(hydroxyethyl methacrylate-lactic-co-glycolic acid) nanoparticles. Additionally, the anti-inflammatory drug BRP-187 was used to proof the potential of this technique in the encapsulation of hydrophobic drugs. The effect of the oligomer composition on the miniemulsion and the final dispersion stability, the final oligomer conversion, the poly(hydroxyethyl methacrylate-lactic acid) and poly(hydroxyethyl methacrylate-lactic-co-glycolic acid) nanoparticles in an efficient and fast manner is shown.There is no doubt that the wide application of COFs depends on the diversity and complexity of their structure and composition, as well as the feasibility and convenience of use. Herein, large area defect-free continuous functional material layers have been fabricated by compounding sub-stoichiometric tetratopic-tritopic covalent organic frameworks (TT-COFs) on graphene oxide (GO) via simply hot pressing. The one-step synthesis of TT-COFs with built-in formyl groups endowed the robust material layers with extraordinary host-guest interactions, so they can specifically reject cations dyes according to adsorption effect, molecular sieving and Donnan effect. Owing to the through-plane molecular transfer channels, large amounts of water molecules can pass through the internal channel rapidly. As a result, high rejection of 99.5% and large flux of 309.99 L·m-2·h-1·bar-1 for dye molecules have been realized. This simple and effective method provided more extensive practicality and greater convenience in recycling and reuse, and demonstrated the utility and high efficiency of TT-COFs with built-in formyl groups as an advanced material platform for dyes removal.In this study, FeMg-LDH loaded with bentonite (FeMg-LDH@bentonite) was prepared using the facile co-precipitating method in situ to remove heavy metals from water and then characterized using XRD, SEM, TEM, FTIR, BET, TGA, and XPS. Pb (II) and Cd (II) were selected as the representative heavy metals to evaluate the adsorption capability of the FeMg-LDH@bentonite. The batch adsorption method was adopted to test the effects of the contact time, pH, initial concentration, different cations, and temperatures. The kinetic study indicated that the adsorption of heavy metals onto FeMg-LDH@bentonite was well fitted by the pseudo-second-order method. Isotherms were effectively simulated based on the Langmuir model. The maximal adsorption capability of Cd (II) and Pb (II) can reach 510.2 mg/g and 1397.62 mg/g, exceeding those of conventional adsorbents. The adsorption mechanisms of FeMg-LDH@bentonite demonstrating that there may exist surface complexation, ion exchange, and chemical deposition between FeMg-LDH@bentonite and heavy metals. Moreover, FeMg-LDH@bentonite was found to have a promising application for practically treating wastewater with heavy metals and can be used for various environmental water pollution treatments. The material may be used for heavy metal contaminated soil in the future.Tumor vascular blockade is a promising strategy for adjuvant cancer treatment. In this work, a self-delivery nanomedicine is developed based on a vascular disruptor and photosensitizer for tumor synergistic therapy. Specifically, this nanomedicine (designated as CeCA) is comprised of combretastatin A4 (CA4) and chlorine e6 (Ce6) by self-assembly technique. Among which, CA4 could not only induce tubulin inhibition for chemotherapy but also disrupt the vasculature to cause tumor hemorrhage. Moreover, Ce6 is able to generate lots of singlet oxygen (1O2) for synergistic photodynamic therapy (PDT) under light irradiation. It is interesting that the carrier-free CeCA possessed a favorable stability and an improved cellular uptake behavior. After intravenous administration, CeCA prefers to accumulate at tumor site for vascular disruption-supplemented chemo-photodynamic therapy. Notably, CeCA is prepared without additional carriers, which avoids the system toxicity raised by excipients. Consequently, CeCA greatly inhibits the tumor growth and leads to a low side effect in vivo. It might open a window in the development of self-supplementary nanomedicine for synergistic tumor treatment.This in vitro study aimed to evaluate the overall mechanical properties of resin infiltrants doped with bioactive nanofibers and their ability in inhibiting enamel demineralization or achieving remineralization of the adjacent enamel to white spots. A commercial resin infiltrant (ICON, DMG) was doped with hybrid inorganic-organic nanofibers and analyzed for degree of conversion (DC, n = 3) and surface hardness (SH, n = 6). [https://www.selleckchem.com/products/fg-4592.html Roxadustat mouse] Subsequently, enamel specimens (6 × 4 × 2 mm3) were prepared and submitted to a demineralizing/remineralizing process to produce a subsurface caries-like lesion. The specimens were treated with one of the following materials ICON infiltrant, DMG (control); ICON + nanofibers of poly-lactic acid (PLA)-filled with silica (PLA-SiO2); ICON + nanofibers of (PLA)-filled with calcium incorporated into a silica network (SiO2-CaP). Then, the specimens were subjected to a pH-cycling demineralizing/remineralizing model for 7 days at 37 °C. The %ΔSH change (after treatment), %SH loss and %SH recovery (acling. In conclusion, tailored hybrid nanofibers may be incorporated into enamel resin infiltrants without compromise the mechanical properties of such experimental materials. These latter can inhibit the demineralization of enamel and increase its hardness during pH-clycling challange.Efficient diamond machining of zirconia requires a comprehensive understanding of repetitive diamond indentation mechanics. This paper reports on in-situ cyclic nanoindentations of pre-sintered and sintered zirconia materials performed inside a scanning electron microscope (SEM). In-situ SEM imaging of cyclic indentation processes and high-magnification SEM mapping of indentation imprints were conducted. The elastic and plastic behaviors of pre-sintered and sintered zirconia materials were investigated as a function of the cyclic nanoindentation number using the Sakai and Sakai-Nowak models. For pre-sintered zirconia, cyclic nanoindentation induced quasi-plastic deformation, causing localized agglomeration of zirconia crystals with microcracks and large cracking along the indentation edge. Severely compressed, fragmented, and pulverized zirconia crystals and smeared surfaces were also observed. For sintered zirconia, shear bands dominated quasi-plastic deformation with the formation of edge pile-ups and localized microfractures occurred at indentation apex and diagonals. All elastic and plastic behaviors for pre-sintered and sintered zirconia materials revealed significantly microstructure-dependent. Pre-sintered zirconia yielded significantly lower contact hardness, Young's moduli, resistance to plasticity, elastic deformation components, and resistance to machining-induced cracking, and higher elastic and plastic displacements than sintered state. Meanwhile, all the behaviors for the two materials were independent from the cyclic nanoindentation number. A model was proposed for cyclic nanoindentation mechanics, revealing their cyclic indentation-induced microstructural changes in the two zirconia materials. This study advances the fundamental understanding of nanoindentation mechanics of zirconia materials.<br /><br /> To assess the community's perception of epilepsy and its treatment in onchocerciasis-endemic villages of Maridi County, Western Equatoria State, South Sudan. The study was conducted prior to the setting up of a community-based intervention to manage the important disease burden caused by onchocerciasis-associated epilepsy in these villages.<br /><br /> Five focus group discussions (FGD) were conducted with community leaders and with persons with epilepsy (PWE) and their families between November and December 2019.<br /><br /> Villages close to the Maridi dam were considered to be most affected by epilepsy. Misconceptions about the cause and treatment of epilepsy were identified. Most people believed that epilepsy is caused by bad spirits and is contagious, transmitted through saliva, air, and contact with PWE. Very few participants were aware of the link between onchocerciasis and epilepsy. Persons with epilepsy are restricted in their day-to-day activities and children with epilepsy are often denied going to school. Persons with epilepsy are stigmatized and seen as unfit for marriage. Most participants considered both traditional and medical treatment as ineffective. Uninterrupted anti-seizure treatment continuously was unaffordable for most families with one or more PWE.<br /><br /> There is a need to establish a comprehensive epilepsy treatment program which addresses misconceptions about epilepsy and reduces epilepsy-related stigma. Explaining the link between onchocerciasis and epilepsy could lead to a reduction in epilepsy-related stigma.<br /><br />There is a need to establish a comprehensive epilepsy treatment program which addresses misconceptions about epilepsy and reduces epilepsy-related stigma. Explaining the link between onchocerciasis and epilepsy could lead to a reduction in epilepsy-related stigma.